Moode USB Output

[Taki8888]

You're welcome !    we are here to help

All the best for the new screen ..!

Awesome help.  :-)

Here is the 10” 2K touch screen. Nice and sharp. Great colors. The corners are hard at times to touch, no response,
most likely not touching the right area. It is great overall. Only need to touch corners to add music or power off.

The reason I wanted pure black was so there would not be black bars on the 2 sides. 

If you get one, the USB cable for touch, puts power on the USB from the monitor’s power supply. The rpi will not
shut down completely nor turn back on. I lifted and removed the power pin from the USB A side connector. Solved the problem.

Have a great weekend everyone.

Cheers