Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Official moOde 6.7.1 support thread
#35
(07-24-2020, 05:21 PM)Tim Curtis Wrote: This log entry shows card 0 is empty

Code:
20200724 114520 worker: Device raw: (0:Headphones|1:empty|2:empty|3:empty

It should look like below. Device "b1" is the HDMI port. That log was from the Pi-3B+ thats used to host the stock moOde image.

Code:
20200723 161755 worker: Device raw: (0:b1|1:Headphones|2:empty|3:empty

It's not obvious to me what's going on on your end.

Yeah, I don't know that either Smile . I tried it with version 6.7.1 and a raspberry pi 2. same result .... probably there is something special with HDMI, with the audiojack a the transmission is ok. 

I'm now also trying with a Pi-3B+ and get back to you ....

1 Hour later: I just tried Raspberry Pi-3B+:It doesn't work for me with the HDMI on the Denon X4100W either. Again, to be clear, everything works, but no audio on the stereo (Denon X4100W) via HDMI.

Then I tried Moode 6.5.2 on the same setup (Pi-3B+) (Kernel 4.19). This version runs from the first boot perfectly with audio output over HDMI !
Reply


Messages In This Thread
Small GUI detail - by jv275475 - 07-24-2020, 07:46 AM
RE: Official moOde 6.7.1 support thread - by andib - 07-25-2020, 02:01 PM
Tags used by Moode - by Macdelf - 08-02-2020, 01:46 PM
Track Tags - by Macdelf - 12-16-2020, 11:57 PM
RE: Track Tags - by TheOldPresbyope - 12-17-2020, 12:56 AM
RE: Track Tags - by Macdelf - 12-17-2020, 04:32 PM
RE: Track Tags - by Kikaha - 12-17-2020, 05:01 PM

Forum Jump: