how to attach local drive

[Giordano]

Hi,
It is a RPI4 with 2GB ram. I put some system reply what I know below, but is it a compete system info query in moOde?

Anyway, now,
Step1, I flashed another sdcard, than scanned the local drive. I did not expanded the file system.
It scanned it all fine.
Step2, now the network drive scan is running.

Step3, I will reflesh the card, but before I scan any drive, I expand the file system.

Thanks!
JG


pi@moode:/var/log/mpd $ lscpu
Architecture:        armv7l
Byte Order:          Little Endian
CPU(s):              4
On-line CPU(s) list: 0-3
Thread(s) per core:  1
Core(s) per socket:  4
Socket(s):           1
Vendor ID:           ARM
Model:               3
Model name:          Cortex-A72
Stepping:            r0p3
CPU max MHz:         1500.0000
CPU min MHz:         600.0000
BogoMIPS:            180.00
Flags:               half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
pi@moode:/var/log/mpd $ lsblk
NAME        MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda           8:0    0  3.7T  0 disk
`-sda1        8:1    0  3.7T  0 part /media/zeneM
mmcblk0     179:0    0  7.2G  0 disk
|-mmcblk0p1 179:1    0  256M  0 part /boot
`-mmcblk0p2 179:2    0  3.4G  0 part /
pi@moode:/var/log/mpd $ lsusb
Bus 002 Device 002: ID 1058:2620 Western Digital Technologies, Inc.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub