[How to do instruction] Using FLIRC and other USB input devices for remote control

[TheOldPresbyope]

One a freshly installed 6.7.1 if I say

thd –dump/dev/input/event* | tee keycodes.cap

I get

Error opening '–dump/dev/input/event*': No such file or directory

So I found out that there is a type in the first Code-Box, the command must be like in the second one:

thd --dump /dev/input/event* | tee keycodes.cap

Thanks for posting this and my apology for not acting sooner. (A house move has severely disrupted my online life!) I fixed the offending line.

Regards,
Kent