Official moOde 7.0.1 support thread

[bitlab]

@oculto

I'm struggling to figure out what to suggest.

I don't have a HiFiBerry Digi+ Pro (nor a downstream audio system with an S/PDIF input) on hand so I can't exactly replicate your setup. To at least work with the I2S interface I installed a HiFi Berry DAC+ Pro on an RPi3B+. Flashed a uSD card with a fresh install of moOde 7.0.0 (which I immediately upgraded to 7.0.1 once I booted).

I can not reproduce any of your issues. This combo works fine communicating wirelessly. it plays the preloaded radio stations. It loads the entire contents of my NAS into its library. It plays through my downstream audio system whether the Auto-Shuffle feature is enabled or not.

Several times you mention behaviors which suggest the mpd process is getting killed (which shouldn't happen). These include

• connecct to spotify but gui was unresponsive
  
• dashboard blank
  
• connection to mpd failed
  

Sorry, at this point I don't have any definitive answers. Be sure your power supply, power cable, and power connector are good enough for this application. Poor power can be a source of mysterious problems with any RPi-based audio streamer. I assume the software driver for the HiFiBerry Digi+ Pro is compatible with the kernel 5.4.77-v7+ in moOde 7.0.1 but I have no way of testing that. 

You still need to post your logs but if the WebUI is unresponsive you'll have to log into the command line through SSH to be able to get them.

Regards,
Kent

 
Both Digi+ (RPi 3A+) and Digi+ Pro (RPi 3B+) work for me running 7.0.1

Marc

Here also no issues with a clean 7.0.1 on Pi2b with a Hifiberry Digi+ Pro.

You can check if the modules are loaded with the following command:

Code:

lsmod | grep wm8804

Should return something like:

Code:

pi@moodedev:~ $ lsmod | grep wm8804
snd_soc_wm8804_i2c     16384  1
snd_soc_wm8804         16384  1 snd_soc_wm8804_i2c
regmap_i2c             16384  1 snd_soc_wm8804_i2c
snd_soc_rpi_wm8804_soundcard    16384  1
snd_soc_core          200704  3 snd_soc_rpi_wm8804_soundcard,snd_soc_wm8804,snd_soc_bcm2835_i2s
snd_pcm                94208  4 snd_soc_wm8804,snd_pcm_dmaengine,snd_soc_bcm2835_i2s,snd_soc_core

Notice the wm8004 drivers; the driver for HB Digi+ Pro are loaded.
Else look in the output of the command dmesg for drivers issues.