03-08-2021, 06:45 PM
(03-07-2021, 03:14 PM)fdealexa Wrote:(03-07-2021, 10:57 AM)mrudzin Wrote:(03-06-2021, 10:59 PM)Hello Wrote: I cannot see these signs when I am displaying them. Maybe there is a bug somewhere earlier. I have a problem setting the slave pcm type.
First things first.
I create an asound file, cof and edit the slave pcm.
Then I make a copy of this file in another directory under the name .asoundrc
Yes?
what should I enter in slave.pcm, different things get displayed after typing aplay -l.
When editing files in parentheses, is it not necessary to enter the physical resolution of the display?
- what is your display configuration?
In this question, I don't quite understand what it is.
I think we'll fire it together.
I have moodeAudio ver 6.7.1
Let's try step by step:
could you please send the output of the following commands:
Code:aplay -l
sudo /var/www/command/sysinfo.sh
cat /etc/mpd.conf
cat /etc/asound.conf
ls -lia /dev/fb*
About display configuration: I mean "what is your system configuration"? for example: raspberry pi 4b, allo piano dac, local display 7 inch, etc
After the installation, are you able to listen the music?
Regards,
Francesco
Hello
Since I decided not to give up, this answer will be quite long
I will divide it into parts to make it easier for us to talk.
1. After entering the command
cd PeppyMeter
sudo openvt -s - sudo python3 peppymeter.py
I can see different types of indicators changing on the screen. So this part of the installation went fine.
2. After entering the command
/ home / pi / peppyalsa / src / peppyalsa-client / var / tmp / peppyfifo
I can't see the bars flashing to the beat of the music
3. After entering the command
aplay -l
such an answer
**** List of PLAYBACK Hardware Devices ****
card 0: DAC [I-Saber Q2M DAC], device 0: I-Saber Q2M DAC i-saber-codec-i2c.1-0048-0 [I-Saber Q2M DAC i-saber-codec-i2c.1-0048 -0]
Subdevices: 0/1
Subdevice # 0: subdevice # 0
4. After entering the command
sudo /var/www/command/sysinfo.sh
S Y S T E M P A R A M E T E R S
moOde release = 6.7.1 2020-07-22
RaspiOS = 10.4
Linux kernel = 5.4.51-v7+ #1325
Platform = Pi-3B+ 1GB v1.3
Architecture = armv7l (32-bit)
System uptime = up 15 minutes
Timezone = Europe/Warsaw
Current time = 2021-03-08 19:34:33
Host name = moode
Ethernet address = 192.168.1.121
Ethernet MAC = b8:27:eb:7b:3a:4f
WLAN address = unassigned
WLAN MAC = b8:27:eb:2e:6f:1a
WLAN country = US
SoC identifier = bcm2837
Core count = 4
Kernel timer freq = 100 Hz
SDCard freq = 50 MHz
USB boot = enabled
Warranty = OK
Root size = 3.4G
Root used = 90%
Root available = 342M
Root expand = not expanded
Memory free = 22 MB
Memory used = 837 MB
SoC temperature = 50.5°C
CPU governor = ondemand
Onboard WiFi = On
Onboard BT = On
HDMI output = On
LED state = 1,1
Eth addr wait = On
Max USB current = Off
USB (UAC2) fix = Off
Pi-3B+ eth fix = Off
SSH term server = On
PHP-FPM version = 7.3.14
NGINX version = 1.14.2
SQLite3 version = 3.27.2
Hostapd version = 2.8-devel
WiringPi version = 2.50
RPi.GPIO version = 0.7.0
A U D I O P A R A M E T E R S
Audio device = Audiophonics ES9028/9038 DAC
Interface = I2S
Mixer name = Digital
Hardware volume = Controller detected
Max ALSA volume = 100
Max MPD volume = 100
Volume step limit = 10
Audio source = Local
Output device = Local
Resume MPD = No
Volume knob = 0
Volume mute = Unmuted
Saved MPD vol = 0
Preamp volume = 0
ALSA version = 1.1.8-1+rpt1
SoX version = 0.1.2-3
Bluetooth controller = On
Pairing agent = On
Airplay receiver = Off
Spotify receiver = Off
Squeezelite = Off
UPnP client = On
DLNA server = Off
GPIO button handler = Off
UPnP browser = Off
Auto-shuffle = Off
Autoplay = Off
Rotary encoder = Off
Encoder params = 100 2 3 23 24
USB volume knob = Off
Polarity inversion = Off
Crossfeed = Off
Crossfade = Off
Parametric EQ = Off
Graphic EQ = Off
MPD httpd = Off
A P P E A R A N C E S E T T I N G S
Themes and backgrounds
----------------------
Theme = Pure Black
Accent color = Grass
Alpha blend = 1.0
Adaptive background = Yes
Background image = No
Cover backdrop = No
Cover blur = 20px
Cover scale = 1.25
Library options
----------------------
Instant play action = Add/Play
Show tagview genres = Yes
Show tagview covers = Yes
Show sample rate = No
Ellipsis limited text = No
Thumbnail columns = 6/2 (Default)
Albumview sort order = by Artist
Tagview sort order = by Artist
Compilation identifier = Various Artists
Recently added = 1 Month
Ignore articles = a,an,the
UTF8 character filter = No
Hi-res thumbs = Auto
Cover search pri = Embedded cover
Pixel ratio = 1.25
Coverview screen saver
----------------------
CoverView auto-display = Never
CoverView style = Gradient (Linear)
Other options
----------------------
Font size = Normal
Auto-shuffle filter = None
Extra metadata = composer,encoded
Playback history = No
First use help = y,n
M P D S E T T I N G S
Version = 0.21.24
Volume control = disabled
ALSA device = hw:0
SoX resampling = disabled
SoX quality = very high
SoX multithreading = off
DSD over PCM (DoP) = yes
Replaygain = off
Replaygain preamp = 0
Volume normalization = No
Audio buffer = 4096 (kb)
Output buffer size = 131072 (kb)
B L U E T O O T H S E T T I N G S
Bluetooth ver = 5.50
Bluealsa ver = v2.1.0
Speaker sharing = No
Resume MPD = No
PCM buffer time = 500000 (μs)
A I R P L A Y S E T T I N G S
Version = 3.3.6
Friendly name = Moode Airplay
ALSA device = hw:0
Interpolation = soxr
Output bit depth = S16
Output sample rate = 44100
Session interruption = no
Session timeout = 120 (ms)
Latency offset = 0.0 (secs)
Audio buffer = 0.2 (secs)
Resume MPD = No
S P O T I F Y S E T T I N G S
Friendly name = Moode Spotify
ALSA device = plughw:0
Bit rate = 160
Initial volume = 0
Volume curve = Logarithmic
Volume normalization = No
Normalization pregain = 0
Autoplay = No
Resume MPD = No
S Q U E E Z E L I T E S E T T I N G S
Version = 1.8.7-1052 "DSD/SRC enabled"
Friendly name = Moode
ALSA device = hw:0
ALSA params = 80:4::1
Output buffers = 40000:100000
Task priority = 45
Codec list = flac,pcm,mp3,ogg,aac,alac,dsd
Other options = -W -D 500 -R E -S /var/local
Resume MPD = No
L O C A L D I S P L A Y S E T T I N G S
Local UI display = On
Mouse cursor = On
Screen blank = off Secs
Wake display on play = Off
Brightness = 255
Pixel aspect ratio = Square
Rotate screen = 0 Deg
M O O D E S T A R T U P L O G
20210306 201439 worker: -- Start
20210306 201441 worker: Successfully daemonized
20210306 201442 worker: Integrity check (warning: playerlib.php)
20210306 201442 worker: Integrity check (passed with warnings)
20210306 201442 worker: Session loaded
20210306 201442 worker: Debug logging (off)
20210306 201442 worker: Device raw: (0AC|1:empty|2:empty|3:empty
20210306 201442 worker: Device i2s: (Audiophonics ES9028/9038 DAC)
20210306 201442 worker: Device mpd: (0:Audiophonics ES9028/9038 DAC)
20210306 201442 worker: Device ses: (0|Audiophonics ES9028/9038 DAC|Digital|0%)
20210306 201442 worker: ALSA Digital volume set to (0%)
20210306 201442 worker: -- System
20210306 201446 worker: Host (moode)
20210306 201446 worker: moOde (6.7.1 2020-07-22)
20210306 201446 worker: RaspiOS (10.4)
20210306 201446 worker: Kernel (5.4.51-v7+ #1325)
20210306 201446 worker: Platform (Pi-3B+ 1GB v1.3)
20210306 201446 worker: ARM arch (armv7l, 32-bit kernel)
20210306 201446 worker: MPD ver (0.21.24)
20210306 201446 worker: CPU gov (ondemand)
20210306 201446 worker: USB boot enabled
20210306 201446 worker: File system not expanded yet
20210306 201446 worker: HDMI port on
20210306 201447 worker: File check (OK)
20210306 201447 worker: -- Network
20210306 201447 worker: eth0 exists
20210306 201447 worker: IP addr (192.168.1.121)
20210306 201447 worker: Netmask (255.255.255.0)
20210306 201447 worker: Gateway (192.168.1.3)
20210306 201447 worker: Pri DNS (8.8.4.4)
20210306 201447 worker: Domain (8.8.8.8)
20210306 201447 worker: wlan0 exists
20210306 201447 worker: wifi country (US)
20210306 201447 worker: wlan0 SSID is blank
20210306 201447 worker: eth0 addr exists, AP mode not started
20210306 201447 worker: wlan0 address not assigned
20210306 201448 worker: -- Audio
20210306 201448 worker: MPD conf updated
20210306 201449 worker: ALSA outputs unmuted
20210306 201449 worker: ALSA card number (0)
20210306 201449 worker: Audio output (Audiophonics ES9028/9038 DAC)
20210306 201449 worker: Audio formats (S16_LE, S32_LE)
20210306 201449 worker: ALSA mixer name (Digital)
20210306 201449 worker: MPD volume control (disabled)
20210306 201449 worker: Hdwr volume controller exists
20210306 201449 worker: Max ALSA volume (100%)
20210306 201449 worker: Reset renderer active flags
20210306 201449 worker: -- MPD
20210306 201449 worker: MPD started
20210306 201450 worker: MPD accepting connections
20210306 201450 worker: Configure MPD outputs
20210306 201450 worker: MPD output 1 ALSA default (on)
20210306 201450 worker: MPD output 2 ALSA crossfeed (off)
20210306 201450 worker: MPD output 3 ALSA parametric eq (off)
20210306 201450 worker: MPD output 4 ALSA graphic eq (off)
20210306 201450 worker: MPD output 5 ALSA polarity inversion (off)
20210306 201450 worker: MPD output 6 ALSA bluetooth (off)
20210306 201450 worker: MPD output 7 HTTP stream (off)
20210306 201450 worker: MPD crossfade (off)
20210306 201450 worker: -- Feature availability
20210306 201450 worker: Source select (available)
20210306 201450 worker: Source select (source: MPD)
20210306 201450 worker: Source select (output: Audiophonics ES9028/9038 DAC)
20210306 201450 worker: Bluetooth (available)
20210306 201450 worker: Bluetooth (started)
20210308 191945 worker: Bluetooth pairing agent (started)
20210308 191945 worker: Airplay renderer (available)
20210308 191945 worker: Spotify renderer (available)
20210308 191945 worker: Squeezelite renderer (available)
20210308 191945 worker: UPnP renderer (available)
20210308 191945 worker: UPnP renderer (started)
20210308 191945 worker: DLNA server (available)
20210308 191945 worker: UPnP browser (available)
20210308 191945 worker: Audio scrobbler (available)
20210308 191945 worker: GPIO button handler (available)
20210308 191945 worker: -- Music sources
20210308 191945 worker: USB sources (none attached)
20210308 191949 worker: NAS and UPnP sources (mountall initiated)
20210308 191949 worker: -- Miscellaneous
20210308 191949 worker: USB volume knob (Off)
20210308 191949 worker: Shellinabox SSH started
20210308 191949 worker: USB auto-mounter (udisks-glue)
20210308 191949 worker: LED0 (On)
20210308 191949 worker: LED1 (On)
20210308 191949 worker: Saved MPD vol level (0)
20210308 191950 worker: Preamp volume level (0)
20210308 191950 worker: MPD volume level (0) restored
20210308 191950 worker: ALSA Digital volume (100%)
20210308 191950 worker: Auto-play (Off)
20210308 191950 worker: LocalUI started
20210308 191950 worker: Maintenance interval (3 hrs)
20210308 191950 worker: Screen saver activation (Never)
20210308 191951 worker: Session permissions (OK)
20210308 191951 worker: Watchdog started
20210308 191951 worker: Ready
5. After entering the command
cat /etc/mpd.conf
#########################################
# This file is automatically generated
# by the MPD configuration page.
#########################################
music_directory "/var/lib/mpd/music"
playlist_directory "/var/lib/mpd/playlists"
db_file "/var/lib/mpd/database"
log_file "/var/log/mpd/log"
pid_file "/var/run/mpd/pid"
state_file "/var/lib/mpd/state"
sticker_file "/var/lib/mpd/sticker.sql"
user "mpd"
group "audio"
bind_to_address "any"
port "6600"
log_level "default"
restore_paused "yes"
auto_update "no"
follow_outside_symlinks "yes"
follow_inside_symlinks "yes"
zeroconf_enabled "no"
zeroconf_name "Moode MPD"
filesystem_charset "UTF-8"
metadata_to_use "+comment"
replaygain "off"
replaygain_preamp "0"
volume_normalization "no"
audio_buffer_size "4096"
max_output_buffer_size "131072"
max_connections "128"
decoder {
plugin "ffmpeg"
enabled "yes"
}
input {
plugin "curl"
}
resampler {
plugin "soxr"
quality "very high"
threads "1"
}
audio_output {
type "alsa"
name "ALSA default"
device "peppyalsa"
mixer_type "none"
dop "yes"
}
audio_output {
type "alsa"
name "ALSA crossfeed"
device "crossfeed"
mixer_type "none"
dop "yes"
}
audio_output {
type "alsa"
name "ALSA parametric eq"
device "eqfa4p"
mixer_type "none"
dop "yes"
}
audio_output {
type "alsa"
name "ALSA graphic eq"
device "alsaequal"
mixer_type "none"
dop "yes"
}
audio_output {
type "alsa"
name "ALSA polarity inversion"
device "invpolarity"
mixer_type "none"
dop "yes"
}
audio_output {
type "alsa"
name "ALSA bluetooth"
device "btstream"
mixer_type "software"
}
audio_output {
type "httpd"
name "HTTP stream"
port "8000"
encoder "lame"
bitrate "320"
tags "yes"
always_on "yes"
}
6. After entering the command
cat /etc/asound.conf
pcm.peppyalsa {
type meter
slave.pcm "hw:0,0"
scopes.0 peppyalsa
}
pcm_scope.peppyalsa {
type peppyalsa
decay_ms 400
meter "/var/tmp/peppyfifo"
meter_max 100
meter_show 0
spectrum "/var/tmp/peppyfifosa"
spectrum_max 100
spectrum_size 30
}
pcm_scope_type.peppyalsa {
lib /usr/local/lib/libpeppyalsa.so
}
7. After entering the command
ls -lia /dev/fb*
7252 crw-rw---- 1 root video 29, 0 Mar 6 20:14 /dev/fb0
That's it for now
greetings
