Here's a guide which I found useful. It's aimed at Roon users, but you don't actually need Roon. It walks you through a route to use REW to create a room correction convolution file that can then be loaded into Camilla DSP in Moode. https://community.roonlabs.com/t/a-guide...roon/23800
Edit: I just want to add that I have not been able to get this working correctly yet. The 'corrected' response when played back through Camilla has more deviations than the original. Further investigation showed that a frequency dip that I set at 1kHz became shifted up to around 2.5kHz. I followed the advice from @bitlab in another thread but had no success. I'll wait for Moode 7.2 to appear with its improved wav file converter, and if that doesn't change things I'll try asking for help in the Camilla DSP thread at diyAudio.
Edit: I just want to add that I have not been able to get this working correctly yet. The 'corrected' response when played back through Camilla has more deviations than the original. Further investigation showed that a frequency dip that I set at 1kHz became shifted up to around 2.5kHz. I followed the advice from @bitlab in another thread but had no success. I'll wait for Moode 7.2 to appear with its improved wav file converter, and if that doesn't change things I'll try asking for help in the Camilla DSP thread at diyAudio.
