04-21-2021, 06:44 PM
@gingerbeer
First things first:
1. No need to run:
On the moOde camilladsp config page at the bottom there is a section called Pipeline Editor. It status is off flip the toggle switch to turn it on.
2. Also no need to comment out the 384 in the alsa_cdsp config.
3. CamillaDSP 5 beta 6 doesn't have fixes that would fixes the indicated problems. The changes with with preinstalled version are mostly related to using an alsa a capture devide (which isn't the case when use moOde out of the box).
4. The offline states in the camillagui is normal when no music is playing. moOde uses the alsa_cdsp device to automatic start camilladsp when music plays and stop camilladsp when the music plays. So if you don't have sound for any reason camilladsp will also be offline. The camillagui will start in that case its own copy only for edit purpose (not for playback).
5. Because the configuration how moode deals with audio devices selection is changed in moode 7.2, I would not recommand to just 'pull' in the git repo. Just a little more patience until 7.2 is released. Which indeed fixes some camilladsp configuration issues (see change log on 7.2 thread), but probably not your current issue.
Now lets see if we can find a reason of the issues, but lets first go back to the beginning:
First things first:
1. No need to run:
Code:
sudo systemctl enable camillagui.serviceOn the moOde camilladsp config page at the bottom there is a section called Pipeline Editor. It status is off flip the toggle switch to turn it on.
2. Also no need to comment out the 384 in the alsa_cdsp config.
3. CamillaDSP 5 beta 6 doesn't have fixes that would fixes the indicated problems. The changes with with preinstalled version are mostly related to using an alsa a capture devide (which isn't the case when use moOde out of the box).
4. The offline states in the camillagui is normal when no music is playing. moOde uses the alsa_cdsp device to automatic start camilladsp when music plays and stop camilladsp when the music plays. So if you don't have sound for any reason camilladsp will also be offline. The camillagui will start in that case its own copy only for edit purpose (not for playback).
5. Because the configuration how moode deals with audio devices selection is changed in moode 7.2, I would not recommand to just 'pull' in the git repo. Just a little more patience until 7.2 is released. Which indeed fixes some camilladsp configuration issues (see change log on 7.2 thread), but probably not your current issue.
Now lets see if we can find a reason of the issues, but lets first go back to the beginning:
- turnof camilladsp.
- select headphone or hdmi as playdevice from the moode interface, hooking up to a headphone/speaker whatever you have available.
- verify if you have sound by using the default supplied test file.
- at moode camilladsp config page make sure the default device option in
- select the flat configuration
- press save
- play again the test file
- if the first try isn't successfull select annother default available config press save and after that switch back to flat and press save.
- play again the test file
