Hi Tim
Sorry for this late reply.
To rotate 270 clockwise i set :
display_rotate=3
Based on some research, i found this
0 is the normal configuration. 1 is 90 degrees. 2 is 180 degress. 3 is 270 degrees.
config.txt adds for my screen below, i use to disable dtoverlay, i wonder it’s for touch purpose
screen is more for seeing currently playing than for control.
i use a low res here because screen is small and not very accurate
hdmi_drive=2
hdmi_force_hotplug=1
hdmi_group=2
hdmi_mode=87
hdmi_cvt 600 400 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=1,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
display_rotate=3
Best regards
Stephane
Sorry for this late reply.
To rotate 270 clockwise i set :
display_rotate=3
Based on some research, i found this
0 is the normal configuration. 1 is 90 degrees. 2 is 180 degress. 3 is 270 degrees.
config.txt adds for my screen below, i use to disable dtoverlay, i wonder it’s for touch purpose
screen is more for seeing currently playing than for control.
i use a low res here because screen is small and not very accurate
hdmi_drive=2
hdmi_force_hotplug=1
hdmi_group=2
hdmi_mode=87
hdmi_cvt 600 400 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=1,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
display_rotate=3
Best regards
Stephane
