05-09-2021, 06:38 PM
(05-09-2021, 05:21 PM)Tim Curtis Wrote: The file /etc/alsa/conf.d/_deviceout.conf should like below after setting Output device to "Pi Headphone jack" in MPD Config and then clicking SAVE.
Code:pi@rp1:~ $ cat /etc/alsa/conf.d/_deviceout.conf
pcm._deviceout {
type copy
slave.pcm "plughw:1,0"
}
Ok, the setting already was "Pi Headphone jack".
I switched to "Pi HDMI 1" and saved the settings. The _deviceout.conf still has the same timestamp.
I switched back to "Pi Headphone jack" and saved again, still no change in the file.
For some reason, saving does not work.
I tried to save the MPD settings at 19:30, below are all the files in /etc/alsa/conf.d/. Some seem to get a change, some not.
Are the file permissions, owners and groups correct?
I guess, I just could change the file manually, but like to drill down to the reason saving does not work.
Code:
ls -l /etc/alsa/conf.d/
total 44
-rwxr-xr-x 1 root root 299 May 9 19:30 20-bluealsa-dmix.conf
-rw-r--r-- 1 root root 1087 Dec 15 12:57 20-bluealsa.conf
-rwxr-xr-x 1 root root 51 May 1 13:33 _audioout.conf
-rwxr-xr-x 1 root root 48 May 1 13:33 _deviceout.conf
-rwxr-xr-x 1 root root 856 May 9 14:48 _sndaloop.conf
-rwxr-xr-x 1 root root 284 May 9 19:30 alsaequal.conf
-rwxr-xr-x 1 root root 137 Dec 15 12:57 btstream.conf
-rw-r--r-- 1 root root 1098 Mar 27 11:10 camilladsp.conf
-rwxr-xr-x 1 root root 396 May 9 19:30 crossfeed.conf
-rwxr-xr-x 1 root root 1450 May 9 19:30 eqfa12p.conf
-rwxr-xr-x 1 root root 260 May 9 19:30 invpolarity.conf