Hi, finally two weeks ago I've completed the assembling of my network streamer. It's based on an RPi3 B + Hifiberry DAC PRO+. In addition an OLED 16x2 display and a momentary led button to switch on/off the streamer.
To manage a safe start/shutdown I use a Mauseberry board, plugged into the microUSB power connector of the Raspy.
Obviously the system is running Moode .
It plays music coming from my ripped-CD collection stored onto a Synology NAS, or streaming from Tidal.
The case is built on wooden MDF (thickness is 19 mm). On the front, apart the display and the button, a USB slot. On the rear, a IEC socket with light switch, the two RCA connectors, the Ethernet plug and the HDMI ( not used at now, as I prefer show the Moode UI through a web Browser on my smart TV (Sony).
Here two pictures...
[attachment=201]
[attachment=202]
It plays very well. I had some problems migrating from Moode 4.1 to 4.2, but finally it works well.
ciao!
Andrea
To manage a safe start/shutdown I use a Mauseberry board, plugged into the microUSB power connector of the Raspy.
Obviously the system is running Moode .
It plays music coming from my ripped-CD collection stored onto a Synology NAS, or streaming from Tidal.
The case is built on wooden MDF (thickness is 19 mm). On the front, apart the display and the button, a USB slot. On the rear, a IEC socket with light switch, the two RCA connectors, the Ethernet plug and the HDMI ( not used at now, as I prefer show the Moode UI through a web Browser on my smart TV (Sony).
Here two pictures...
[attachment=201]
[attachment=202]
It plays very well. I had some problems migrating from Moode 4.1 to 4.2, but finally it works well.
ciao!
Andrea
