You can adjust via alsa by ssh into MoOde and ...
[*]Enter "alsamixer" and press the Enter key.
[*]You will now see a user interface. In this user interface, you can do the following:
You should decrease one channel rather than increasing the other as that may lead to clipping.
Then just adjust the overall output volume through your normal volume control.
Try that.... it won't survive a reboot but if it works for you it can be made permanent..with...
[*]Enter "alsamixer" and press the Enter key.
[*]You will now see a user interface. In this user interface, you can do the following:
- Select your correct sound card using F6 and select F5 to see recording controls as well
- Move around with left and right arrow keys.
- Increase and decrease volume with up and down arrow keys.
- Increase and decrease volume for left/right channel individually with "Q", "E", "Z", and "C" keys.
- Mute/Unmute with the "M" key. An "MM" means muted, and "OO" means unmuted. Note that a bar can be 100% full but still be muted, so do check for this.
- Exit from alsamixer with the Esc key.
You should decrease one channel rather than increasing the other as that may lead to clipping.
Then just adjust the overall output volume through your normal volume control.
Try that.... it won't survive a reboot but if it works for you it can be made permanent..with...
Code:
sudo alsactl store
----------
bob
bob
