07-24-2021, 12:54 AM
(This post was last modified: 07-24-2021, 12:54 AM by Tim Curtis.)
Try CamillaDSP
1. Set the configuration to flat
2. OPEN the Pipeline editor (Status = ON)
3. Click the Mixer tab
4. Adjust the gains on each channel and then click "Apply to CDSP" button to hear the change
5. Back arrow and then SAVE the flat config
1. Set the configuration to flat
2. OPEN the Pipeline editor (Status = ON)
3. Click the Mixer tab
4. Adjust the gains on each channel and then click "Apply to CDSP" button to hear the change
5. Back arrow and then SAVE the flat config
