[How to do instruction] 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi

[Jempie]

Hi Jempie

Could you post the output of

Code:

sudo apt install autoconf make libtool libfftw3-dev libmpdclient-dev libi2c-dev i2c-tools lm-sensors

And if the output includes the line 'libfftw3-dev is already the newest version' then try to run configure in the cava directory again.

Kent, thanks for reviewing the start of the mpd_oled installation on a fresh Moode install.

Adrian.

Adrian,

login as: pi
pi@192.168.2.11's password:
RaspiOS 10.6 | 5.4.77-v7l+ #1371 | armv7l (32-bit)

                      ____     __        ____
          __ _  ___  / __ \___/ /__     /_  /
         /  ' \/ _ \/ /_/ / _  / -_)     / /
        /_/_/_/\___/\____/\_,_/\__/     /_/

                 moOde audio player
              Release 7.2.1 2021-05-06
                © 2014 Tim Curtis


The programs included with moOde are free software; the
exact distribution terms for each program are described
in the individual files in /usr/share/doc/*/copyright.
Moode comes with absolutely no warranties expressed or
implied, or any other guarantees.

Last login: Fri Aug 27 03:04:31 2021 from 192.168.2.12
pi@moode:~ $ sudo apt install autoconf make libtool libfftw3-dev libmpdclient-dev libi2c-dev i2c-tools lm-sensors
Reading package lists... Done
Building dependency tree
Reading state information... Done
autoconf is already the newest version (2.69-11).
i2c-tools is already the newest version (4.1-1).
i2c-tools set to manually installed.
libmpdclient-dev is already the newest version (2.16-1).
libtool is already the newest version (2.4.6-9).
make is already the newest version (4.2.1-1.2).
make set to manually installed.
The following additional packages will be installed:
  libfftw3-bin
Suggested packages:
  libfftw3-doc fancontrol
The following NEW packages will be installed:
  libfftw3-bin libfftw3-dev libi2c-dev lm-sensors
0 upgraded, 4 newly installed, 0 to remove and 67 not upgraded.
Need to get 1,220 kB of archives.
After this operation, 4,513 kB of additional disk space will be used.
Do you want to continue? [Y/n] Y
Get:1 http://mirror.serverius.net/raspbian/raspbian buster/main armhf libfftw3-bin armhf 3.3.8-2 [43.6 kB]
Get:2 http://mirror.serverius.net/raspbian/raspbian buster/main armhf libfftw3-dev armhf 3.3.8-2 [1,060 kB]
Get:3 http://mirror.serverius.net/raspbian/raspbian buster/main armhf libi2c-dev armhf 4.1-1 [11.9 kB]
Get:4 http://mirror.serverius.net/raspbian/raspbian buster/main armhf lm-sensors armhf 1:3.5.0-3 [104 kB]
Fetched 1,220 kB in 1s (1,805 kB/s)
Selecting previously unselected package libfftw3-bin.
(Reading database ... 68244 files and directories currently installed.)
Preparing to unpack .../libfftw3-bin_3.3.8-2_armhf.deb ...
Unpacking libfftw3-bin (3.3.8-2) ...
Selecting previously unselected package libfftw3-dev:armhf.
Preparing to unpack .../libfftw3-dev_3.3.8-2_armhf.deb ...
Unpacking libfftw3-dev:armhf (3.3.8-2) ...
Selecting previously unselected package libi2c-dev.
Preparing to unpack .../libi2c-dev_4.1-1_armhf.deb ...
Unpacking libi2c-dev (4.1-1) ...
Selecting previously unselected package lm-sensors.
Preparing to unpack .../lm-sensors_1%3a3.5.0-3_armhf.deb ...
Unpacking lm-sensors (1:3.5.0-3) ...
Setting up libfftw3-bin (3.3.8-2) ...
Setting up libi2c-dev (4.1-1) ...
Setting up lm-sensors (1:3.5.0-3) ...
Created symlink /etc/systemd/system/multi-user.target.wants/lm-sensors.service → /lib/systemd/system/lm-sensors.service.
Setting up libfftw3-dev:armhf (3.3.8-2) ...
Processing triggers for man-db (2.8.5-2) ...
Processing triggers for systemd (241-7~deb10u4+rpi1) ...
pi@moode:~ $