Moode USB Output

[pyhfsg]

        Hi Kent, Tim,
 
Following Kent’s suggestion, I reinstalled Moode on my SD card and tired the following settings:
 
1.     All settings defaulted. No sound from web radio, Spotify. The only sound I get is when I played the test file.
2.     Changed the MPD settings to enable SoX Resampling with “any” Bit depth, “any” Sample rate and Selective resampling “Disabled”.  No sound for both web radio and Spotify.
3.     Same as #2, but changed SoX Resampling to 16 Bit depth, and Sample rate to 48. Web radio works but no sound from Spotify
4.     I then played with the “Selective resampling” with Bit depth set to 16 bit and Sample rate to 48KHz. The results are that I only get sound if the output rate is 16 bit, 48 KHz. I noticed some of the source is decoded to 24 bit and 44.1 KHz and output to 16 bit and 48 KHz. Please see the attached screen captures.
5. If I understand both of you correctly that Spotify only supports output rate of 44.1 KHz. Does that confirm my active speaker can only plays at 48KHz even though it supposed to play anything between 8000 and 48000Hz.

 
Please let me know if the above makes sense and if you have any other troubleshooting suggestions. Thanks.