09-11-2021, 03:53 PM
(This post was last modified: 09-12-2021, 02:02 AM by Tim Curtis.
Edit Reason: typos
)
Below are the commands used when creating a Music Source. Example output is from my network/hosts.
If there is "no output" from these commands try checking Router and AP logs for any error messages regarding blocked ports etc.
If there is "no output" from these commands try checking Router and AP logs for any error messages regarding blocked ports etc.
Code:
# Command used by the SCAN function.
pi@rp1:~ $ sudo smbtree -N -b
WORKGROUP
\\RT-N66U RT-N66U
\\RT-N66U\IPC$ IPC Service (RT-N66U)
\\RT-N66U\VFAT256 ASMT 2115's VFAT256
\\RP3 moOde SMB Server
\\RP3\IPC$ IPC Service (moOde SMB Server)
\\RP3\SDCard SDCARD Storage
\\RP3\Radio RADIO Stations
\\RP3\Playlists Playlist Directory
\\RP3\NAS NAS Shares
\\RP2 moOde SMB Server
\\RP2\IPC$ IPC Service (moOde SMB Server)
\\RP2\VFAT128 USB Storage
\\RP2\SDCard SDCARD Storage
\\RP2\Radio RADIO Stations
\\RP2\Playlists Playlist Directory
\\RP2\NAS NAS Shares
\\RP1 moOde SMB Server
\\RP1\IPC$ IPC Service (moOde SMB Server)
\\RP1\VFAT128 USB Storage
\\RP1\SDCard SDCARD Storage
\\RP1\Radio RADIO Stations
\\RP1\Playlists Playlist Directory
\\RP1\NAS NAS Shares
\\MOODE moOde SMB Server
\\MOODE\IPC$ IPC Service (moOde SMB Server)
\\MOODE\SDCard SDCARD Storage
\\MOODE\Radio RADIO Stations
\\MOODE\Playlists Playlist Directory
\\MOODE\NAS NAS Shares
\\LT5 LT5
pi@rp1:~ $
# Command used to determine Samba protocol versions available on the specified host. This is run when the Music Source is created. The highest version available will be used.
pi@rp1:~ $ sudo nmap rp2 -p 139 --script smb-protocols |grep \|
| smb-protocols:
| dialects:
| NT LM 0.12 (SMBv1) [dangerous, but default]
| 2.02
| 2.10
| 3.00
| 3.02
|_ 3.11
pi@rp1:~ $