(09-28-2021, 05:00 AM)radu- Wrote: Looks like I've been to quick to dismiss this. On my Pi3 it worked like I described, but on my Zero I get the same issue. Here's my log:
Code:$ moodeutl -l
20210928 075516 worker: -- Start
20210928 075516 worker: Successfully daemonized
20210928 075518 worker: Integrity check (passed)
20210928 075525 worker: File check (OK)
20210928 075528 worker: Session vacuumed
20210928 075528 worker: Session loaded
20210928 075528 worker: Debug logging (OFF)
20210928 075528 worker: -- Audio debug
20210928 075528 worker: ALSA cards: (0:sndrpihifiberry | 1:empty | 2:empty | 3:empty
20210928 075528 worker: MPD config: (0:HiFiBerry DAC/DAC+ Zero | mixer:(none) | card:0)
20210928 075529 worker: ALSA mixer actual (PCM)
20210928 075529 worker: ALSA PCM volume set to (amixer: Unable to find simple control 'PCM',0)
20210928 075529 worker: -- System
20210928 075558 worker: Host (dormi)
20210928 075559 worker: moOde (7.4.0 2021-09-24)
20210928 075559 worker: RaspiOS (10.6)
20210928 075559 worker: Kernel (5.4.77+ #1371)
20210928 075559 worker: Platform (Pi-Zero W 1.1 512MB)
20210928 075559 worker: ARM arch (armv6l, 32-bit kernel)
20210928 075559 worker: MPD ver (0.22.11_p0x3)
20210928 075559 worker: CPU gov (ondemand)
20210928 075559 worker: USB boot not available
20210928 075559 worker: File system expanded
20210928 075559 worker: HDMI port off
20210928 075559 worker: -- Network
20210928 075559 worker: eth0 does not exist
20210928 075559 worker: eth0 address not assigned
20210928 075559 worker: wlan0 exists
20210928 075559 worker: wifi country (RO)
20210928 075559 worker: wlan0 trying SSID (AddamsFamily24)
20210928 075559 worker: IP addr (10.11.12.106)
20210928 075600 worker: Netmask (255.255.255.0)
20210928 075600 worker: Gateway (10.11.12.1)
20210928 075600 worker: Pri DNS (10.11.12.1)
20210928 075600 worker: Domain (10.11.12.77)
20210928 075600 worker: Pi integrated wlan0 power save disabled
20210928 075600 worker: -- Audio config
20210928 075600 worker: MPD conf update skipped
20210928 075600 worker: ALSA card number (0)
20210928 075604 worker: MPD audio output (snd_rpi_hifiberry_dac)
20210928 075605 worker: Audio formats (S16_LE, S24_LE, S32_LE)
20210928 075605 worker: ALSA mixer name (none)
20210928 075605 worker: MPD mixer type (software)
20210928 075605 worker: Hdwr volume controller not detected
20210928 075605 worker: ALSA output mode (Default: plughw)
20210928 075605 worker: ALSA loopback (Off)
20210928 075605 worker: Reset renderer active flags
20210928 075605 worker: CamillaDSP (off)
20210928 075605 worker: -- MPD startup
20210928 075605 worker: MPD started
20210928 075605 worker: MPD accepting connections
20210928 075606 worker: MPD output 1 ALSA Default (on)
20210928 075606 worker: MPD output 2 ALSA Bluetooth (off)
20210928 075606 worker: MPD output 3 HTTP Server (off)
20210928 075606 worker: MPD crossfade (off)
20210928 075606 worker: MPD ignore CUE files (yes)
20210928 075606 worker: -- Feature availability
20210928 075606 worker: Source select (available)
20210928 075606 worker: Source select (source: MPD)
20210928 075606 worker: Source select (output: snd_rpi_hifiberry_dac)
20210928 075606 worker: Bluetooth (available)
20210928 075606 worker: Airplay renderer (available)
20210928 075606 worker: Spotify renderer (available: started)
20210928 075606 worker: Squeezelite (available: started)
20210928 075606 worker: RoonBridge renderer (not installed)
20210928 075606 worker: Multiroom sender (available)
20210928 075606 worker: Multiroom receiver (available)
20210928 075606 worker: UPnP renderer (available)
20210928 075606 worker: DLNA server (available)
20210928 075606 worker: UPnP browser (available)
20210928 075606 worker: GPIO button handler (available)
20210928 075606 worker: Stream recorder (n/a)
20210928 075606 worker: -- Music sources
20210928 075607 worker: USB sources (none attached)
20210928 075609 worker: NAS and UPnP sources (mountall initiated)
20210928 075609 worker: -- Other
20210928 075609 worker: USB volume knob (Off)
20210928 075609 worker: USB auto-mounter (udisks-glue)
20210928 075609 worker: LED0 (On)
20210928 075609 worker: LED1 (sysclass does not exist)
20210928 075609 worker: Saved MPD vol level (0)
20210928 075609 worker: Preamp volume level (0)
20210928 075609 worker: MPD volume level (0) restored
20210928 075609 worker: ALSA volume level (None)
20210928 075609 worker: Auto-play (Off)
20210928 075609 worker: Maintenance interval (3 hours)
20210928 075609 worker: Screen saver activation (60)
20210928 075609 worker: Session permissions (OK)
20210928 075610 worker: Watchdog started
20210928 075610 worker: Ready
20210928 075711 sendEngCmd(): File open failed, UI has never been started
I just saw that now the UI doesn't start. I'll reboot and see what happens.
There is a very helpful set-up document accessed from the Multiroom configuration page....and it says .... RPi 4 and 3B+ as sender and then later...
Quote:3. ARM6 single-core Pi's including Pi-1B and Pi-Zero have not been tested as
either Sender or Receiver and so YMMV.
You can try again with your Zero but do read the documentation...
----------
bob
bob
