09-18-2018, 06:23 AM
(This post was last modified: 09-18-2018, 06:24 AM by abrakadabra2k.)
I finally got it working smoothly :-)
I did not much more than the instructions by Rafa (and I still have some ports open from previous tests, namely 5353, 57621 and 4000, but i cant say if this had an effect here )
Just some more annotions:
- I also had to rename gevent.wsgi to gevent.pywsgi in the main.py
- removing a bluetoothstick (and a wifi stick) made me change the audio output again
- the volume was quite low (also with radios via moode), even though all settings in moode were set to max/0dB values. I managed to get a reasonable output via alsamixer (in my case "alsamixer -D hw:0" , increasing the right volume poti-thingy, and saving with "sudo alsactl store")
Best wishes,
Chris
I did not much more than the instructions by Rafa (and I still have some ports open from previous tests, namely 5353, 57621 and 4000, but i cant say if this had an effect here )
Just some more annotions:
- I also had to rename gevent.wsgi to gevent.pywsgi in the main.py
- removing a bluetoothstick (and a wifi stick) made me change the audio output again
- the volume was quite low (also with radios via moode), even though all settings in moode were set to max/0dB values. I managed to get a reasonable output via alsamixer (in my case "alsamixer -D hw:0" , increasing the right volume poti-thingy, and saving with "sudo alsactl store")
Best wishes,
Chris
