Topping D90SE USB not working with Pi4

[mystic]

Hello again,

Now I have latest moode but error is the same.

moodeutl -l

Code:

pi@moode:~ $ moodeutl -l
20211108 112451 worker: -- Start
20211108 112451 worker: Successfully daemonized
20211108 112451 worker: Integrity check (passed)
20211108 112452 worker: File check (OK)
20211108 112452 worker: Session vacuumed
20211108 112452 worker: Session loaded
20211108 112452 worker: Debug logging (OFF)
20211108 112452 worker: -- Audio debug
20211108 112452 worker: ALSA cards: (0:b1 | 1:Headphones | 2:D90SE | 3:empty
20211108 112452 worker: MPD config: (2:D90SE | mixer:(Invalid card number.) | card:2)
20211108 112452 worker: ALSA mixer actual (PCM)
20211108 112452 worker: ALSA PCM volume set to (amixer: Unable to find simple control 'PCM',0)
20211108 112452 worker: -- System
20211108 112454 worker: Host     (moode)
20211108 112454 worker: moOde    (7.2.1 2021-05-06)
20211108 112454 worker: RaspiOS  (10.6)
20211108 112454 worker: Kernel   (5.4.77-v7l+ #1371)
20211108 112454 worker: Platform (Pi-4B 1.4 4GB)
20211108 112454 worker: ARM arch (armv7l, 32-bit kernel)
20211108 112454 worker: MPD ver  (0.22.6_p0x3)
20211108 112454 worker: CPU gov  (ondemand)
20211108 112454 worker: USB boot not available
20211108 112454 worker: File system expanded
20211108 112454 worker: HDMI port on
20211108 112454 worker: -- Network
20211108 112454 worker: eth0 exists
20211108 112454 worker: IP addr (192.168.0.87)
20211108 112454 worker: Netmask (255.255.255.0)
20211108 112454 worker: Gateway (192.168.0.1)
20211108 112454 worker: Pri DNS (62.179.1.61)
20211108 112454 worker: Domain  (home)
20211108 112454 moode.php: MPD connect failed: cmd=(playlist)
20211108 112454 worker: wlan0 does not exist
20211108 112454 worker: -- Audio config
20211108 112454 worker: ALSA card number (2)
20211108 112454 worker: MPD audio output (D90SE)
20211108 112454 worker: Audio formats (No device found at MPD configured card 2)
20211108 112454 worker: ALSA mixer name (Invalid card number.)
20211108 112454 worker: MPD volume control (none)
20211108 112454 worker: Hdwr volume controller exists
20211108 112454 worker: Max ALSA volume (100%)
20211108 112454 worker: ALSA loopback (Off)
20211108 112454 worker: Reset renderer active flags
20211108 112454 worker: CamillaDSP (off)
20211108 112454 worker: -- MPD startup
20211108 112454 worker: MPD started
20211108 112455 worker: MPD accepting connections
20211108 112455 worker: MPD output 1 ALSA Default (on)
20211108 112455 worker: MPD output 2 ALSA Bluetooth (off)
20211108 112455 worker: MPD output 3 HTTP Server (off)
20211108 112455 worker: MPD crossfade (off)
20211108 112455 worker: MPD ignore CUE files (yes)
20211108 112455 worker: -- Feature availability
20211108 112455 worker: Source select (available)
20211108 112455 worker: Source select (source: MPD)
20211108 112455 worker: Source select (output: D90SE)
20211108 112455 worker: Bluetooth (available)
20211108 112455 worker: Airplay renderer (available)
20211108 112455 worker: Spotify renderer (available)
20211108 112455 worker: Squeezelite (available)
20211108 112455 worker: RoonBridge renderer (not installed)
20211108 112455 worker: UPnP renderer (available)
20211108 112455 worker: DLNA server (available)
20211108 112455 worker: UPnP browser (available)
20211108 112455 worker: GPIO button handler (available)
20211108 112455 worker: Stream recorder (n/a)
20211108 112455 worker: -- Music sources
20211108 112455 worker: USB sources (none attached)
20211108 112455 worker: NAS and UPnP sources (none configured)
20211108 112455 worker: -- Other
20211108 112455 worker: USB volume knob (Off)
20211108 112455 worker: USB auto-mounter (udisks-glue)
20211108 112455 worker: LED0 (On)
20211108 112455 worker: LED1 (On)
20211108 112455 worker: Saved MPD vol level (0)
20211108 112455 worker: Preamp volume level (0)
20211108 112455 worker: MPD volume level (0) restored
20211108 112455 worker: ALSA Invalid card number. volume (amixer: Unable to find simple control 'Invalid card number.',0)
20211108 112455 worker: Auto-play (Off)
20211108 112455 worker: LocalUI started
20211108 112455 worker: Maintenance interval (3 hours)
20211108 112455 worker: Screen saver activation (Never)
20211108 112455 worker: Session permissions (OK)
20211108 112456 worker: Watchdog started
20211108 112456 worker: Ready

moodeutl -F

Code:

pi@moode:~ $ moodeutl -F
*** Scanning for playback devices ***
Card 0, ID `b1', name `bcm2835 HDMI 1'
 Device 0, ID `bcm2835 HDMI 1', name `bcm2835 HDMI 1', 4 subdevices (4 available)
   1..8 channels, sampling rate 8000..192000 Hz
   Sample formats: U8, S16_LE
   Buffer size range from 80 to 131072
   Period size range from 80 to 131072

     Subdevice 0, name `subdevice #0'
     Subdevice 1, name `subdevice #1'
     Subdevice 2, name `subdevice #2'
     Subdevice 3, name `subdevice #3'
Card 1, ID `Headphones', name `bcm2835 Headphones'
 Device 0, ID `bcm2835 Headphones', name `bcm2835 Headphones', 4 subdevices (4 available)
   1..8 channels, sampling rate 8000..192000 Hz
   Sample formats: U8, S16_LE
   Buffer size range from 80 to 131072
   Period size range from 80 to 131072

     Subdevice 0, name `subdevice #0'
     Subdevice 1, name `subdevice #1'
     Subdevice 2, name `subdevice #2'
     Subdevice 3, name `subdevice #3'
Card 2, ID `D90SE', name `D90SE'
 Device 0, ID `USB Audio', name `USB Audio', 1 subdevices (1 available)
   2 channels, sampling rate 44100..768000 Hz
   Sample formats: S32_LE, SPECIAL, DSD_U32_BE
   Buffer size range from 16 to 131072
   Period size range from 8 to 65536

     Subdevice 0, name `subdevice #0'

amixer -c 2
empty response (meaning):

Code:

pi@moode:~ $ amixer -c 2
pi@moode:~ $

alsacap

Code:

sudo alsacap
*** Scanning for playback devices ***
Card 0, ID `b1', name `bcm2835 HDMI 1'
 Device 0, ID `bcm2835 HDMI 1', name `bcm2835 HDMI 1', 4 subdevices (4 available)
   1..8 channels, sampling rate 8000..192000 Hz
   Sample formats: U8, S16_LE
   Buffer size range from 80 to 131072
   Period size range from 80 to 131072

     Subdevice 0, name `subdevice #0'
     Subdevice 1, name `subdevice #1'
     Subdevice 2, name `subdevice #2'
     Subdevice 3, name `subdevice #3'
Card 1, ID `Headphones', name `bcm2835 Headphones'
 Device 0, ID `bcm2835 Headphones', name `bcm2835 Headphones', 4 subdevices (4 available)
   1..8 channels, sampling rate 8000..192000 Hz
   Sample formats: U8, S16_LE
   Buffer size range from 80 to 131072
   Period size range from 80 to 131072

     Subdevice 0, name `subdevice #0'
     Subdevice 1, name `subdevice #1'
     Subdevice 2, name `subdevice #2'
     Subdevice 3, name `subdevice #3'

Any other hints ?