11-11-2021, 03:08 PM
I don't know whether this is a related phenomenon, but I am experiencing an increasingly laggy and almost unrespomsive Web UI on my RPi 1B moOde installation. This is a basic moOde installation on a RPi 1N with no additional DAC or hardware other than a USB WiFi Adapter and USB Bluetooth Transmitter. I use this as a remote (slave) to my Library installed on a RPi 3B accessed by SMB over the WiFi network.
The symptom is that the Web UI is very slow to appear after Biit ... could be 3 to 5 minutes. After selecting an iten and tapping Play, it can take several taps at minute intervals for Play to start and after Play starts, the UI doesn't update to show the Pause bars ... for up to 10 minutes.
This problem seemed to appear around the update from v7.30 to 7.40 and then perhaps got worse with each update ... now on v7.50.
I am downloading v7.50 so that I can do a clean installation on a fresh MicroSD Card and see if that helps. I will report back later.
Robin
The symptom is that the Web UI is very slow to appear after Biit ... could be 3 to 5 minutes. After selecting an iten and tapping Play, it can take several taps at minute intervals for Play to start and after Play starts, the UI doesn't update to show the Pause bars ... for up to 10 minutes.
This problem seemed to appear around the update from v7.30 to 7.40 and then perhaps got worse with each update ... now on v7.50.
I am downloading v7.50 so that I can do a clean installation on a fresh MicroSD Card and see if that helps. I will report back later.
Robin
