[SOLVED] Fresh install Pi-4 rev 1.5 not joining network

[Tim Curtis]

Install the official Raspberry Pi imager on your PC
https://www.raspberrypi.com/software/

- Install Raspberry Pi OS Lite (32-bit) on an SD Card
- With SD Card still inserted in your PC use your file explorer to access the /boot directory on the SD Card
- Create the empty file /boot/ssh
- Boot the Pi-4 with Ethernet cable connected

From terminal on your PC

ssh pi@raspberrypi
password = raspberry

This is how I have been doing the eeprom updates. I used the main version of the OS at top of list, not sure of it was the lite.

I don't know  where to go from there with respect to Moode, though.

If latest plain "Bullseye" release of Raspberry Pi OS Lite (32-bit) doesn't get a DHCP IP address in your environment there would be no moOde software involved and thus you should  post your issue in the Raspberry Pi support Forum and see someone can offer to help troubleshoot https://forums.raspberrypi.com/viewforum...3ff1a2a62b