03-11-2022, 02:12 AM
(This post was last modified: 03-11-2022, 04:06 AM by DRONE7.
Edit Reason: code tags
)
When everything is connected
And when I try too play radios:
And when I try to play Stereo test or FLAC from my HDD
Code:
pi@moode:~ $ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.77-v7l+ (dom@buildbot) (gcc version 8.4.0 (Ubuntu/Linaro 8.4.0-3ubuntu1)) #1371 SMP Tue Nov 17 13:35:27 GMT 2020
[ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] On node 0 totalpages: 504832
[ 0.000000] DMA zone: 2304 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:63
[ 0.000000] HighMem zone: 308224 pages, LIFO batch:63
[ 0.000000] percpu: Embedded 20 pages/cpu s49804 r8192 d23924 u81920
[ 0.000000] pcpu-alloc: s49804 r8192 d23924 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 502528
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:30:65:B4 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 console=ttyS0,115200 console=tty1 root=PARTUUID=067e19d7-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x25400000-0x29400000] (64MB)
[ 0.000000] Memory: 1844788K/2019328K available (10240K kernel code, 739K rwdata, 2816K rodata, 2048K init, 854K bss, 109004K reserved, 65536K cma-reserved, 1232896K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 31110 entries in 61 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x344/0x518 with crng_init=0
[ 0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000030] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000108] bcm2835: system timer (irq = 17)
[ 0.000756] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000775] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000795] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000811] Switching to timer-based delay loop, resolution 18ns
[ 0.001050] Console: colour dummy device 80x30
[ 0.001558] printk: console [tty1] enabled
[ 0.001623] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[ 0.001666] pid_max: default: 32768 minimum: 301
[ 0.001829] LSM: Security Framework initializing
[ 0.002032] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.002075] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.003437] Disabling memory control group subsystem
[ 0.003577] CPU: Testing write buffer coherency: ok
[ 0.004095] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.005020] Setting up static identity map for 0x200000 - 0x20003c
[ 0.005240] rcu: Hierarchical SRCU implementation.
[ 0.005929] smp: Bringing up secondary CPUs ...
[ 0.007116] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.008428] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.009684] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.009844] smp: Brought up 1 node, 4 CPUs
[ 0.009919] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[ 0.009947] CPU: All CPU(s) started in HYP mode.
[ 0.009972] CPU: Virtualization extensions available.
[ 0.010816] devtmpfs: initialized
[ 0.024555] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[ 0.024826] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.024877] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.026866] pinctrl core: initialized pinctrl subsystem
[ 0.027880] NET: Registered protocol family 16
[ 0.031904] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.032498] audit: initializing netlink subsys (disabled)
[ 0.032768] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1
[ 0.033889] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.033925] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.034255] Serial: AMBA PL011 UART driver
[ 0.037729] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.060826] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-11-17 13:40, variant start
[ 0.070844] raspberrypi-firmware soc:firmware: Firmware hash is 20c430d6cf4343ed95afba07c4735b7c587a4c83
[ 0.125130] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.130207] vgaarb: loaded
[ 0.130689] SCSI subsystem initialized
[ 0.130973] usbcore: registered new interface driver usbfs
[ 0.131048] usbcore: registered new interface driver hub
[ 0.131198] usbcore: registered new device driver usb
[ 0.131553] usb_phy_generic phy: phy supply vcc not found, using dummy regulator
[ 0.133387] clocksource: Switched to clocksource arch_sys_counter
[ 0.830957] VFS: Disk quotas dquot_6.6.0
[ 0.831079] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.831259] FS-Cache: Loaded
[ 0.831477] CacheFiles: Loaded
[ 0.841829] thermal_sys: Registered thermal governor 'step_wise'
[ 0.842191] NET: Registered protocol family 2
[ 0.842952] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.843004] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.843081] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.843164] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.843326] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.843548] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.843823] NET: Registered protocol family 1
[ 0.844575] RPC: Registered named UNIX socket transport module.
[ 0.844606] RPC: Registered udp transport module.
[ 0.844631] RPC: Registered tcp transport module.
[ 0.844657] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.844691] PCI: CLS 0 bytes, default 64
[ 0.846588] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 0.848807] Initialise system trusted keyrings
[ 0.849052] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.860055] FS-Cache: Netfs 'nfs' registered for caching
[ 0.860801] NFS: Registering the id_resolver key type
[ 0.860846] Key type id_resolver registered
[ 0.860872] Key type id_legacy registered
[ 0.860907] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.862008] Key type asymmetric registered
[ 0.862038] Asymmetric key parser 'x509' registered
[ 0.862244] bounce: pool size: 64 pages
[ 0.862297] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.862556] io scheduler mq-deadline registered
[ 0.862585] io scheduler kyber registered
[ 0.866624] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 0.866666] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 0.866757] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
[ 0.866848] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0000000000
[ 0.925535] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (SSC)
[ 0.925867] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 0.925901] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.925935] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 0.926015] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 0.926300] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.929567] PCI: bus0: Fast back to back transfers disabled
[ 0.929813] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.929976] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.930424] pci 0000:01:00.0: PME# supported from D0 D3cold
[ 0.933701] PCI: bus1: Fast back to back transfers disabled
[ 0.933778] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 0.933817] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 0.933918] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.933956] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 0.934287] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[ 0.934545] pcieport 0000:00:00.0: PME: Signaling with IRQ 55
[ 0.934967] pcieport 0000:00:00.0: AER: enabled with IRQ 55
[ 0.935324] pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 0.936054] bcm2708_fb soc:fb: FB found 1 display(s)
[ 0.946473] Console: switching to colour frame buffer device 80x30
[ 0.949502] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 640x480
[ 0.957854] iproc-rng200 fe104000.rng: hwrng registered
[ 0.959130] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.961686] vc-sm: Videocore shared memory driver
[ 0.963208] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 0.977513] brd: module loaded
[ 0.990940] loop: module loaded
[ 0.993305] Loading iSCSI transport class v2.0-870.
[ 0.996356] libphy: Fixed MDIO Bus: probed
[ 0.997919] bcmgenet fd580000.ethernet: failed to get enet clock
[ 0.998896] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 0.999849] bcmgenet fd580000.ethernet: failed to get enet-wol clock
[ 1.000818] bcmgenet fd580000.ethernet: failed to get enet-eee clock
[ 1.001749] bcmgenet: Skipping UMAC reset
[ 1.013439] libphy: bcmgenet MII bus: probed
[ 1.103502] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.105432] usbcore: registered new interface driver r8152
[ 1.106403] usbcore: registered new interface driver lan78xx
[ 1.107387] usbcore: registered new interface driver smsc95xx
[ 1.108694] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.109600] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.113837] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000003000000890
[ 1.116876] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.118649] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.120447] usb usb1: Product: xHCI Host Controller
[ 1.121352] usb usb1: Manufacturer: Linux 5.4.77-v7l+ xhci-hcd
[ 1.122273] usb usb1: SerialNumber: 0000:01:00.0
[ 1.123855] hub 1-0:1.0: USB hub found
[ 1.124854] hub 1-0:1.0: 1 port detected
[ 1.126300] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.127216] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.129030] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.130575] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.132540] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.134601] usb usb2: Product: xHCI Host Controller
[ 1.135661] usb usb2: Manufacturer: Linux 5.4.77-v7l+ xhci-hcd
[ 1.136743] usb usb2: SerialNumber: 0000:01:00.0
[ 1.138383] hub 2-0:1.0: USB hub found
[ 1.139518] hub 2-0:1.0: 4 ports detected
[ 1.167651] xhci-hcd fe9c0000.xhci: xHCI Host Controller
[ 1.168688] xhci-hcd fe9c0000.xhci: new USB bus registered, assigned bus number 3
[ 1.171630] xhci-hcd fe9c0000.xhci: hcc params 0x0220fe6d hci version 0x110 quirks 0x0000000000010010
[ 1.173718] xhci-hcd fe9c0000.xhci: irq 53, io mem 0xfe9c0000
[ 1.175288] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.177266] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.179319] usb usb3: Product: xHCI Host Controller
[ 1.180399] usb usb3: Manufacturer: Linux 5.4.77-v7l+ xhci-hcd
[ 1.181487] usb usb3: SerialNumber: fe9c0000.xhci
[ 1.183136] hub 3-0:1.0: USB hub found
[ 1.184287] hub 3-0:1.0: 1 port detected
[ 1.185780] xhci-hcd fe9c0000.xhci: xHCI Host Controller
[ 1.186806] xhci-hcd fe9c0000.xhci: new USB bus registered, assigned bus number 4
[ 1.188750] xhci-hcd fe9c0000.xhci: Host supports USB 3.0 SuperSpeed
[ 1.189901] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.192179] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.194284] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.196460] usb usb4: Product: xHCI Host Controller
[ 1.197586] usb usb4: Manufacturer: Linux 5.4.77-v7l+ xhci-hcd
[ 1.198691] usb usb4: SerialNumber: fe9c0000.xhci
[ 1.200365] hub 4-0:1.0: USB hub found
[ 1.201469] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 1.203002] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.204393] dwc_otg: FIQ enabled
[ 1.204406] dwc_otg: NAK holdoff enabled
[ 1.204419] dwc_otg: FIQ split-transaction FSM enabled
[ 1.204435] Module dwc_common_port init
[ 1.204907] usbcore: registered new interface driver uas
[ 1.206083] usbcore: registered new interface driver usb-storage
[ 1.207303] mousedev: PS/2 mouse device common for all mice
[ 1.210131] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.214701] sdhci: Secure Digital Host Controller Interface driver
[ 1.215720] sdhci: Copyright(c) Pierre Ossman
[ 1.217293] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.221557] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.222906] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.224137] usbcore: registered new interface driver usbhid
[ 1.225184] usbhid: USB HID core driver
[ 1.227274] vchiq: vchiq_init_state: slot_zero = (ptrval)
[ 1.230274] [vc_sm_connected_init]: start
[ 1.239489] [vc_sm_connected_init]: end - returning 0
[ 1.242642] Initializing XFRM netlink socket
[ 1.244538] NET: Registered protocol family 17
[ 1.245556] Key type dns_resolver registered
[ 1.246827] Registering SWP/SWPB emulation handler
[ 1.248052] registered taskstats version 1
[ 1.248916] Loading compiled-in X.509 certificates
[ 1.250301] Key type ._fscrypt registered
[ 1.251157] Key type .fscrypt registered
[ 1.262723] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.263704] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 29, base_baud = 0) is a PL011 rev2
[ 1.271571] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.311546] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[ 1.316374] of_cfs_init
[ 1.317549] of_cfs_init: OK
[ 1.319500] Waiting for root device PARTUUID=067e19d7-02...
[ 1.413080] mmc0: new ultra high speed DDR50 SDHC card at address 0001
[ 1.414942] mmcblk0: mmc0:0001 EB1QT 29.8 GiB
[ 1.417749] mmcblk0: p1 p2
[ 1.442030] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.444010] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.450516] devtmpfs: mounted
[ 1.460166] Freeing unused kernel memory: 2048K
[ 1.473703] Run /sbin/init as init process
[ 1.493446] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.563444] usb 3-1: new full-speed USB device number 2 using xhci-hcd
[ 1.566912] random: fast init done
[ 1.696058] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 1.698123] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.699197] usb 1-1: Product: USB2.0 Hub
[ 1.702463] hub 1-1:1.0: USB hub found
[ 1.703775] hub 1-1:1.0: 4 ports detected
[ 1.713475] usb 3-1: device descriptor read/64, error -71
[ 1.900087] systemd[1]: System time before build time, advancing clock.
[ 1.983486] usb 3-1: device descriptor read/64, error -71
[ 2.010823] NET: Registered protocol family 10
[ 2.013139] Segment Routing with IPv6
[ 2.049020] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 2.060678] systemd[1]: Detected architecture arm.
[ 2.123070] systemd[1]: Set hostname to <moode>.
[ 2.253558] usb 3-1: new full-speed USB device number 3 using xhci-hcd
[ 2.413529] usb 3-1: device descriptor read/64, error -71
[ 2.693521] usb 3-1: device descriptor read/64, error -71
[ 2.696187] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.718370] systemd[1]: /lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid → /run/samba/winbindd.pid; please update the unit file accordingly.
[ 2.780619] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
[ 2.809154] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
[ 2.813903] usb usb3-port1: attempt power cycle
[ 2.845727] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.847423] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.851558] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.853630] systemd[1]: Listening on Syslog Socket.
[ 2.859569] systemd[1]: Created slice system-getty.slice.
[ 2.863167] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.035043] i2c /dev entries driver
[ 3.523448] usb 3-1: new full-speed USB device number 4 using xhci-hcd
[ 3.523557] usb 3-1: Device not responding to setup address.
[ 3.561205] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 3.672380] systemd-journald[114]: Received request to flush runtime journal from PID 1
[ 3.743546] usb 3-1: Device not responding to setup address.
[ 3.963469] usb 3-1: device not accepting address 4, error -71
[ 4.113495] usb 3-1: new full-speed USB device number 5 using xhci-hcd
[ 4.115056] usb 3-1: Device not responding to setup address.
[ 4.240367] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[ 4.241232] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[ 4.241683] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[ 4.242119] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[ 4.293763] mc: Linux media interface: v0.10
[ 4.333562] usb 3-1: Device not responding to setup address.
[ 4.337150] videodev: Linux video capture interface: v2.00
[ 4.353105] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.355393] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 4.355416] [vc_sm_connected_init]: start
[ 4.366845] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.367043] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.372280] [vc_sm_connected_init]: installed successfully
[ 4.376614] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.378545] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.380106] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.400897] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.404328] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.405405] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.419075] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.425340] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 4.425903] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 4.426400] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 4.426743] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 4.426770] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 4.426794] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 4.426866] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 4.426891] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 4.427138] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 4.427744] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 4.427785] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 4.429635] bcm2835_audio bcm2835_audio: card created with 4 channels
[ 4.432838] bcm2835_audio bcm2835_audio: card created with 4 channels
[ 4.433858] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 4.433917] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 4.452700] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 4.452741] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 4.553538] usb 3-1: device not accepting address 5, error -71
[ 4.553960] usb usb3-port1: unable to enumerate USB device
[ 6.963144] random: crng init done
[ 6.963163] random: 7 urandom warning(s) missed due to ratelimiting
[ 7.002545] 8021q: 802.1Q VLAN Support v1.8
[ 7.121261] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.163031] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.217126] bcmgenet: Skipping UMAC reset
[ 7.218815] bcmgenet fd580000.ethernet: configuring instance for external RGMII
[ 7.219306] bcmgenet fd580000.ethernet eth0: Link is Down
[ 12.393610] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 12.393666] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.852747] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead
[ 25.765223] FS-Cache: Netfs 'cifs' registered for caching
[ 25.773027] Key type cifs.spnego registered
[ 25.773039] Key type cifs.idmap registered
[ 25.773799] CIFS: Attempting to mount //192.168.1.1/media/music
[ 2713.273511] bcmgenet fd580000.ethernet eth0: Link is Down
[ 2720.553637] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 2734.073542] bcmgenet fd580000.ethernet eth0: Link is Down
[ 2738.233631] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 7517.253445] usb 1-1.3: new high-speed USB device number 3 using xhci_hcd
[ 7517.384242] usb 1-1.3: New USB device found, idVendor=278b, idProduct=5100, bcdDevice= 1.13
[ 7517.384260] usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 7517.384277] usb 1-1.3: Product: Rotel USB Audio 2.0
[ 7517.384293] usb 1-1.3: Manufacturer: Rotel
[ 7517.402699] input: Rotel Rotel USB Audio 2.0 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.3/0003:278B:5100.0001/input/input0
[ 7517.463853] hid-generic 0003:278B:5100.0001: input,hidraw0: USB HID v1.10 Device [Rotel Rotel USB Audio 2.0] on usb-0000:01:00.0-1.3/input3
[ 7517.893599] usb 1-1.3: 1:3 : unsupported format bits 0x100000000
[ 7518.001217] usbcore: registered new interface driver snd-usb-audio
[ 7518.435906] usb 1-1.3: USB disconnect, device number 3
[ 7526.623434] usb 1-1.3: new high-speed USB device number 4 using xhci_hcd
[ 7526.754283] usb 1-1.3: New USB device found, idVendor=278b, idProduct=5100, bcdDevice= 1.13
[ 7526.754302] usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 7526.754319] usb 1-1.3: Product: Rotel USB Audio 2.0
[ 7526.754335] usb 1-1.3: Manufacturer: Rotel
[ 7527.096026] usb 1-1.3: 1:3 : unsupported format bits 0x100000000
[ 7527.210863] input: Rotel Rotel USB Audio 2.0 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.3/0003:278B:5100.0002/input/input1
[ 7527.284393] hid-generic 0003:278B:5100.0002: input,hidraw0: USB HID v1.10 Device [Rotel Rotel USB Audio 2.0] on usb-0000:01:00.0-1.3/input3
[ 7630.988320] usb 1-1.3: USB disconnect, device number 4
[ 7630.988393] usb 1-1.3: cannot submit urb (err = -19)
[ 7631.393393] usb 1-1.3: new high-speed USB device number 5 using xhci_hcd
[ 7631.524359] usb 1-1.3: New USB device found, idVendor=278b, idProduct=5100, bcdDevice= 1.13
[ 7631.524379] usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 7631.524396] usb 1-1.3: Product: Rotel USB Audio 2.0
[ 7631.524412] usb 1-1.3: Manufacturer: Rotel
[ 7631.862760] usb 1-1.3: 1:3 : unsupported format bits 0x100000000
[ 7631.974611] input: Rotel Rotel USB Audio 2.0 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.3/0003:278B:5100.0003/input/input2
[ 7632.043771] hid-generic 0003:278B:5100.0003: input,hidraw0: USB HID v1.10 Device [Rotel Rotel USB Audio 2.0] on usb-0000:01:00.0-1.3/input3And when I try too play radios:
Code:
Dec 18 04:40 : player: played "http://ice1.somafm.com/sf1033-128-aac"
Dec 18 04:40 : exception: Failed to decode http://ice1.somafm.com/sonicuniverse-128-aac; CURL failed: Could not resolve host: ice1.$
Dec 18 04:40 : player: played "http://ice1.somafm.com/sonicuniverse-128-aac"
Dec 18 04:40 : exception: Failed to decode http://ice1.somafm.com/spacestation-128-aac; CURL failed: Could not resolve host: ice1.s$
Dec 18 04:40 : player: played "http://ice1.somafm.com/spacestation-128-aac"
Dec 18 04:40 : exception: Failed to decode http://ice1.somafm.com/suburbsofgoa-128-aac; CURL failed: Could not resolve host: ice1.s$
Dec 18 04:40 : player: played "http://ice1.somafm.com/suburbsofgoa-128-aac"
Dec 18 04:40 : exception: Failed to decode http://ice1.somafm.com/thetrip-128-aac; CURL failed: Could not resolve host: ice1.somafm$
Dec 18 04:40 : player: played "http://ice1.somafm.com/thetrip-128-aac"
Dec 18 04:40 : exception: Failed to decode http://ice1.somafm.com/thistle-128-aac; CURL failed: Could not resolve host: ice1.somafm$
Dec 18 04:40 : player: played "http://ice1.somafm.com/thistle-128-aac"
Dec 18 04:40 : exception: Failed to decode http://ice1.somafm.com/u80s-128-aac; CURL failed: Could not resolve host: ice1.somafm.com
Dec 18 04:40 : player: played "http://ice1.somafm.com/u80s-128-aac"And when I try to play Stereo test or FLAC from my HDD
Code:
Dec 18 04:40 : output: Failed to play on "ALSA Default" (alsa): snd_pcm_writei() failed: File descriptor in bad state
Dec 18 04:40 : exception: Failed to open audio output
Dec 18 04:41 : output: Failed to play on "ALSA Default" (alsa): snd_pcm_writei() failed: File descriptor in bad state
Dec 18 04:41 : exception: Failed to open audio output
Dec 18 04:41 : output: Failed to play on "ALSA Default" (alsa): snd_pcm_writei() failed: File descriptor in bad state
Dec 18 04:41 : exception: Failed to open audio output
Dec 18 04:41 : output: Failed to play on "ALSA Default" (alsa): snd_pcm_writei() failed: File descriptor in bad state
Dec 18 04:41 : exception: Failed to open audio output
Dec 18 04:41 : output: Failed to play on "ALSA Default" (alsa): snd_pcm_writei() failed: File descriptor in bad state
Dec 18 04:41 : exception: Failed to open audio output
Dec 18 04:41 : output: Failed to play on "ALSA Default" (alsa): snd_pcm_writei() failed: File descriptor in bad state
Dec 18 04:41 : exception: Failed to open audio output