Scroll up in the ssh window and then copy/paste the whole output...
Should look like this...
Should look like this...
Code:
$ moodeutl -l
20220309 195104 worker: -- Start
20220312 104010 worker: Successfully daemonized
20220312 104011 worker: Integrity check (passed)
20220312 104035 worker: File check (OK)
20220312 104035 worker: Session vacuumed
20220312 104035 worker: Session loaded
20220312 104035 worker: Debug logging (OFF)
20220312 104035 worker: -- Audio debug
20220312 104035 worker: ALSA cards: (0:b1 | 1:Headphones | 2:D20 | 3:empty
20220312 104035 worker: MPD config: (2:DIYINHK USB Audio 2.0 | mixer:(DIYINHK USB Audio 2.0 ) | card:2)
20220312 104035 worker: ALSA mixer actual (DIYINHK USB Audio 2.0 )
20220312 104036 worker: ALSA DIYINHK USB Audio 2.0 volume set to (0%)
20220312 104036 worker: -- System
20220312 104038 worker: Host (argonone)
20220312 104038 worker: moOde (7.6.1 2021-12-17)
20220312 104038 worker: RaspiOS (10.6)
20220312 104038 worker: Kernel (5.4.77-v7l+ #1371)
20220312 104038 worker: Platform (Pi-4B 1.1 4GB)
20220312 104038 worker: ARM arch (armv7l, 32-bit kernel)
20220312 104038 worker: MPD ver (0.23.4_p0x3)
20220312 104038 worker: CPU gov (performance)
20220312 104038 worker: USB boot not available
20220312 104038 worker: File system expanded
20220312 104038 worker: HDMI port off
20220312 104038 worker: -- Network
20220312 104038 worker: IP address check timeout (90 secs)
20220312 104038 worker: eth0 adapter exists
20220312 104038 worker: eth0 IP address check (No)
20220312 104038 worker: IP addr (192.168.xxx.xx)
20220312 104038 worker: Netmask (255.255.255.0)
20220312 104038 worker: Gateway (192.168.xxx.xx)
20220312 104038 worker: Pri DNS (192.168.xxx.x)
20220312 104038 worker: Domain (xxx.box)
20220312 104038 worker: wlan0 adapter does not exist
20220312 104038 worker: -- Audio config
20220312 104038 worker: MPD conf update skipped (USB device)
20220312 104038 worker: ALSA card number (2)
20220312 104038 worker: MPD audio output (DIYINHK USB Audio 2.0)
20220312 104038 worker: Audio formats (S16_LE, S32_LE, SPECIAL, DSD_U32_BE)
20220312 104038 worker: ALSA mixer name (DIYINHK USB Audio 2.0 )
20220312 104038 worker: MPD mixer type (fixed 0dB)
20220312 104039 worker: Hdwr volume controller exists
20220312 104039 worker: Max ALSA volume (93%)
20220312 104039 worker: ALSA output mode (Default: plughw)
20220312 104039 worker: ALSA loopback (Off)
20220312 104039 worker: Reset renderer active flags
20220312 104039 worker: CamillaDSP (off)
20220312 104039 worker: -- MPD startup
20220312 104039 worker: MPD started
20220312 104039 worker: MPD accepting connections
20220312 104039 worker: MPD output 1 ALSA Default (on)
20220312 104039 worker: MPD output 2 ALSA Bluetooth (off)
20220312 104039 worker: MPD output 3 HTTP Server (off)
20220312 104039 worker: MPD crossfade (off)
20220312 104039 worker: MPD ignore CUE files (yes)
20220312 104039 worker: -- Feature availability
20220312 104039 worker: Source select (available)
20220312 104039 worker: Source select (source: MPD)
20220312 104039 worker: Source select (output: DIYINHK USB Audio 2.0)
20220312 104039 worker: Bluetooth (available)
20220312 104039 worker: Airplay renderer (available)
20220312 104039 worker: Spotify renderer (available)
20220312 104039 worker: Squeezelite (available)
20220312 104039 worker: RoonBridge renderer (not installed)
20220312 104039 worker: Multiroom sender (available)
20220312 104039 worker: Multiroom receiver (available)
20220312 104039 worker: UPnP renderer (available)
20220312 104039 worker: DLNA server (available)
20220312 104039 worker: UPnP browser (available)
20220312 104039 worker: GPIO button handler (available)
20220312 104039 worker: Stream recorder (n/a)
20220312 104039 worker: -- Music sources
20220312 104039 worker: USB sources (none attached)
20220312 104050 sourceMount(): Mount error: (mount error: could not resolve address for omvt620: Unknown error)
20220312 104053 worker: NAS and UPnP sources (mountall initiated)
20220312 104053 worker: -- Other
20220312 104053 worker: USB volume knob (Off)
20220312 104053 worker: USB auto-mounter (udisks-glue)
20220312 104053 worker: LED0 (On)
20220312 104053 worker: LED1 (On)
20220312 104053 worker: Saved MPD vol level (0)
20220312 104053 worker: Preamp volume level (0)
20220312 104053 worker: MPD volume level (0) restored
20220312 104053 worker: ALSA DIYINHK USB Audio 2.0 volume (94%)
20220312 104053 worker: Auto-play (Off)
20220312 104053 worker: Maintenance interval (3 hours)
20220312 104053 worker: Screen saver activation (Never)
20220312 104053 worker: Session permissions (OK)
20220312 104053 worker: Watchdog started
20220312 104053 worker: Ready
pi@argonone:~ $
----------
bob
bob
