07-14-2022, 08:26 PM
As a followup, adding an external USB-WiFi adapter (at the end of a 0.5 ft USB extension cable), disabling the onboard WiFi (dtoverlay=disable-wifi in /boot/config.txt), and rebooting was sufficient to start getting clear MPD audio output over Bluetooth from my Raspberry Pi 2 W.
FWIW, both internal and external WiFi adapters associated with my Access point on the 2.4 GHz band.
Regards,
Kent
FWIW, both internal and external WiFi adapters associated with my Access point on the 2.4 GHz band.
Regards,
Kent