07-15-2022, 02:21 AM
Addendum to Tim's post.
From the Bluetooth A2DP specification,
Here SNK = sink (the receiver) and SRC = source (the sender)
AIUI, the SBC XQ patch specifies bitrates for both sampling frequencies.
Regards,
Kent
PS - note that I misspoke in my earlier post. I wrote "bitrates" but meant "sampling frequencies". I've edited my post.
From the Bluetooth A2DP specification,
Quote:4.3.2.1 Sampling Frequency
Table 4.2 shows the value of the Sampling Frequency field for SBC. For the decoder in the SNK, the
sampling frequencies 44.1 kHz and 48 kHz are mandatory to support. The encoder in the SRC shall
support at least one of the sampling frequencies of 44.1 kHz and 48 kHz
Here SNK = sink (the receiver) and SRC = source (the sender)
AIUI, the SBC XQ patch specifies bitrates for both sampling frequencies.
Regards,
Kent
PS - note that I misspoke in my earlier post. I wrote "bitrates" but meant "sampling frequencies". I've edited my post.
