08-03-2022, 02:06 PM
One possible new feature for upcoming 8.2.0 release is "Router mode". It's an enhancement to the existing Access Point mode whereby packets are forwarded between wlan0 and eth0 interfaces. The usage scenario for this as its's been explained to me are environments where Ethernet is available but WiFi is either not available or cannot be accessed.
It's based on the code examples in the article below starting at the "Enable Packet Forwarding" section.
https://learn.sparkfun.com/tutorials/set...-point/all
If I do end up implementing this I might be able to provide an early test image so you could try modifying the NAT rules to forward wlan0 to both eth0 and eth1, something like that. Email Tim at moodeaudio dot org if interested.
It's based on the code examples in the article below starting at the "Enable Packet Forwarding" section.
https://learn.sparkfun.com/tutorials/set...-point/all
If I do end up implementing this I might be able to provide an early test image so you could try modifying the NAT rules to forward wlan0 to both eth0 and eth1, something like that. Email Tim at moodeaudio dot org if interested.
