[How to do instruction] 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi

[Tim Curtis]

Aha.....I had forgotten that the  headphone output could be disabled....the things one lets slide lol.

I will try with  dtparam  audio=off  and see if that fixes it :-)

looks like that has done the trick...will try again tomorrow when i have the system running again.

Code:

aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
 Subdevices: 6/8
 Subdevice #0: subdevice #0
 Subdevice #1: subdevice #1
 Subdevice #2: subdevice #2
 Subdevice #3: subdevice #3
 Subdevice #4: subdevice #4
 Subdevice #5: subdevice #5
 Subdevice #6: subdevice #6
 Subdevice #7: subdevice #7
card 0: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
 Subdevices: 8/8
 Subdevice #0: subdevice #0
 Subdevice #1: subdevice #1
 Subdevice #2: subdevice #2
 Subdevice #3: subdevice #3
 Subdevice #4: subdevice #4
 Subdevice #5: subdevice #5
 Subdevice #6: subdevice #6
 Subdevice #7: subdevice #7

Quick trial without any HDMI connected and all seems to be fine!!  Got the spectrum analyser  and the title scrolling working.

That output shows only the Loopback device. There is no HDMI or Headphone audio device prolly because of audio=off.

What I've observed with Headphone or HDMI audio  + Loopback is that 44.1K rate will cause MPD playback error while other rates play fine. I've only been able to get 44.1K to work by setting SoX to Depth=Any, Rate=Something other than 44.1K