[SOLVED] Moode unreachable through web, but SSH works?

[buckaroo]

Thanks, Tim! I didn't see any log entries regarding PHP, but you might see something else here that I would miss:

Code:

20220921 001547 worker: --
20220921 001548 worker: -- Start moOde 8 series
20220921 001548 worker: --
20220921 001548 worker: Successfully daemonized
20220921 001552 worker: File check (OK)
20220921 001553 worker: Session vacuumed
20220921 001553 worker: Session loaded
20220921 001553 worker: Debug logging (OFF)
20220921 001553 worker: --
20220921 001553 worker: -- Audio debug
20220921 001553 worker: --
20220921 001553 worker: ALSA cards: (0:sndrpihifiberry | 1:empty | 2:empty | 3:empty
20220921 001553 worker: MPD config: (0:HiFiBerry DAC+ Pro | mixer:(Digital) | card:0)
20220921 001553 worker: ALSA mixer actual (Digital)
20220921 001553 worker: ALSA Digital volume set to (0%)
20220921 001553 worker: --
20220921 001553 worker: -- System
20220921 001553 worker: --
20220921 001556 worker: Host      (moode-br)
20220921 001556 worker: moOde     (8.1.2 2022-07-08)
20220921 001556 worker: RaspiOS   (11.3)
20220921 001556 worker: Kernel    (5.15.32-v8+ #1538)
20220921 001556 worker: Platform  (Pi-  )
20220921 001556 worker: ARM arch  (aarch64, 64-bit)
20220921 001556 worker: MPD ver   (0.23.5)
20220921 001556 worker: CPU gov   (ondemand)
20220921 001556 worker: USB boot  (not available)
20220921 001556 worker: File sys  (expanded)
20220921 001556 worker: HDMI port (On)
20220921 001557 worker: Sys LED0  (On)
20220921 001557 worker: Sys LED1  (On)
20220921 001557 worker: --
20220921 001557 worker: -- Network
20220921 001557 worker: --
20220921 001557 worker: eth0 adapter exists
20220921 001557 worker: eth0 check for address (No)
20220921 001557 worker: eth0 address not assigned
20220921 001557 worker: wlan0 adapter exists
20220921 001557 worker: wlan0 country (US)
20220921 001557 worker: wlan0 connected SSID is (Solaris)
20220921 001557 worker: IP addr (192.168.1.119)
20220921 001557 worker: Netmask (255.255.255.0)
20220921 001557 worker: Gateway (192.168.1.1)
20220921 001557 worker: Pri DNS (192.168.1.1)
20220921 001557 worker: Domain  (lan)
20220921 001558 worker: --
20220921 001558 worker: -- Audio config
20220921 001558 worker: --
20220921 001559 worker: MPD conf updated
20220921 001559 worker: ALSA card number (0)
20220921 001559 worker: MPD audio output (HiFiBerry DAC+ Pro)
20220921 001559 worker: Audio formats (S16_LE, S24_LE, S32_LE)
20220921 001559 worker: ALSA mixer name (Digital)
20220921 001559 worker: MPD mixer type (fixed 0dB)
20220921 001559 worker: Hdwr volume controller exists
20220921 001559 worker: Max ALSA volume (100%)
20220921 001559 worker: ALSA output mode (Default: plughw)
20220921 001559 worker: ALSA loopback (Off)
20220921 001559 worker: Reset renderer active flags
20220921 001559 worker: CamillaDSP (off)
20220921 001559 worker: --
20220921 001559 worker: -- MPD startup
20220921 001559 worker: --
20220921 001601 worker: MPD started
20220921 001601 worker: MPD accepting connections
20220921 001601 worker: MPD output 1 ALSA Default (On)
20220921 001601 worker: MPD output 2 ALSA Bluetooth (Off)
20220921 001601 worker: MPD output 3 HTTP Server (Off)
20220921 001601 worker: MPD crossfade (off)
20220921 001601 worker: MPD ignore CUE files (yes)
20220921 001601 worker: --
20220921 001601 worker: -- Music sources
20220921 001601 worker: --
20220921 001601 worker: USB sources (none attached)
20220921 001603 worker: NAS sources (mountall initiated)
20220921 001603 worker: --
20220921 001603 worker: -- Feature availability
20220921 001603 worker: --
20220921 001603 worker: Source select (available)
20220921 001603 worker: Source select (source: MPD)
20220921 001603 worker: Source select (output: HiFiBerry DAC+ Pro)
20220921 001603 worker: Bluetooth (available)
20220921 001603 worker: Airplay renderer (available)
20220921 001603 worker: Spotify renderer (available)
20220921 001603 worker: Squeezelite (available)
20220921 001603 worker: RoonBridge renderer (not installed)
20220921 001603 worker: Multiroom sender (available)
20220921 001603 worker: Multiroom receiver (available)
20220921 001603 worker: UPnP renderer (available)
20220921 001603 worker: DLNA server (available)
20220921 001603 worker: GPIO button handler (available)
20220921 001603 worker: Stream recorder (n/a)
20220921 001603 worker: --
20220921 001603 worker: -- Other
20220921 001603 worker: --
20220921 001603 worker: USB volume knob (Off)
20220921 001603 worker: USB auto-mounter (udisks-glue)
20220921 001603 worker: Saved MPD vol level (0)
20220921 001603 worker: Preamp volume level (0)
20220921 001603 worker: MPD volume level (0) restored
20220921 001603 worker: ALSA Digital volume (100%)
20220921 001603 worker: Auto-play (Off)
20220921 001603 worker: CoverView toggle (-off)
20220921 001603 worker: Maintenance interval (120 minutes)
20220921 001603 worker: Screen saver activation (Never)
20220921 001603 worker: Session permissions (OK)
20220921 001604 worker: Watchdog started
20220921 001604 worker: Ready

Mpd.service appears to be dead, for some reason:

Code:

● mpd.service - Music Player Daemon
    Loaded: loaded (/lib/systemd/system/mpd.service; disabled; vendor preset: enabled)
    Active: inactive (dead)
      Docs: man:mpd(1)
            man:mpd.conf(5)
            file:///usr/share/doc/mpd/html/user.html

Nothing looks unusual with nginx.service:

Code:

● nginx.service - A high performance web server and a reverse proxy server
    Loaded: loaded (/lib/systemd/system/nginx.service; enabled; vendor preset: enabled)
    Active: active (running) since Sat 2022-10-01 14:47:25 EDT; 4h 8min ago
      Docs: man:nginx(8)
   Process: 432 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on; master_process on; (code=exited, status=0/SUCCESS)
   Process: 451 ExecStart=/usr/sbin/nginx -g daemon on; master_process on; (code=exited, status=0/SUCCESS)
  Main PID: 452 (nginx)
     Tasks: 5 (limit: 1010)
       CPU: 174ms
    CGroup: /system.slice/nginx.service
            ├─452 nginx: master process /usr/sbin/nginx -g daemon on; master_process on;
            ├─453 nginx: worker process
            ├─454 nginx: worker process
            ├─455 nginx: worker process
            └─456 nginx: worker process

But something seems to be wrong with php7.4-fpm.service:

Code:

● php7.4-fpm.service - The PHP 7.4 FastCGI Process Manager
    Loaded: loaded (/lib/systemd/system/php7.4-fpm.service; enabled; vendor preset: enabled)
    Active: failed (Result: signal) since Sat 2022-10-01 14:47:24 EDT; 4h 11min ago
      Docs: man:php-fpm7.4(8)
   Process: 433 ExecStart=/usr/sbin/php-fpm7.4 --nodaemonize --fpm-config /etc/php/7.4/fpm/php-fpm.conf (code=kil>
   Process: 438 ExecStopPost=/usr/lib/php/php-fpm-socket-helper remove /run/php/php-fpm.sock /etc/php/7.4/fpm/poo>
  Main PID: 433 (code=killed, signal=SEGV)
       CPU: 41ms

Oct 01 14:47:24 moode-br systemd[1]: Starting The PHP 7.4 FastCGI Process Manager...
Oct 01 14:47:24 moode-br systemd[1]: php7.4-fpm.service: Main process exited, code=killed, status=11/SEGV
Oct 01 14:47:24 moode-br systemd[1]: php7.4-fpm.service: Failed with result 'signal'.
Oct 01 14:47:24 moode-br systemd[1]: Failed to start The PHP 7.4 FastCGI Process Manager.

My longest ping was about 8 ms, but the vast majority were around 2-4 ms. Seems okay to me.
Also didn't see any other than 0 when I ran ifconfig.

So it looks like the culprit might lie in the MPD and/or PHP services - but I'm too much of a noob to know what to do about it. Any ideas?

Thanks!