Login

grandfunk69 · (This post was last modified: 10-30-2022, 10:14 AM by grandfunk69.)

Yesterday after many tests, with several reboots, I could not mount my NAS. I did shutdown and turn off my raspberry pi.
This morning I connected moode again and surprisingly my NAS appeared mounted.
Continuing with the tests, I did a reboot to see the result and again the NAS appeared unmounted (red cross).
I have both logs (before and after reboot).
The difference I see is the following:

FIRST BOOT:

20221029 222047 worker: Try (mount -t cifs "//MYCLOUDEX2ULTRA/Public" -o username="admin",password="Argot22&",rsize=61440,wsize=65536,iocharset=utf8,ro,noserverino,dir_mode=0777,file_mode=07
77 "/mnt/NAS/nuevo")
20221029 222047 worker: Err (mount error: could not resolve address for MYCLOUDEX2ULTRA: Unknown error)
20221029 222047 worker: Mount all submitted
20221029 222047 worker: --
20221029 222047 worker: -- Feature availability
20221029 222047 worker: --
20221029 222047 worker: Source select (available)
20221029 222047 worker: Source select (source: MPD)
20221029 222047 worker: Source select (output: Pre Box S2 Digital)
20221029 222047 worker: Bluetooth (available)
20221029 222047 worker: AirPlay renderer (available)
20221029 222047 worker: Spotify renderer (available)
20221029 222047 worker: Squeezelite (available)
20221029 222047 worker: RoonBridge renderer (not installed)
20221029 222047 worker: Multiroom sender (available)
20221029 222047 worker: Multiroom receiver (available)
20221029 222047 worker: UPnP renderer (available: started)
20221029 222047 worker: DLNA server (available)
20221029 222047 worker: GPIO button handler (available)
20221029 222047 worker: Stream recorder (n/a)
20221029 222047 worker: --
20221029 222047 worker: -- Other
20221029 222047 worker: --
20221029 222047 worker: USB volume knob (Off)
20221029 222048 worker: Shellinabox SSH started
20221029 222048 worker: USB auto-mounter (udisks-glue)
20221029 222048 worker: Saved MPD vol level (0)
20221029 222048 worker: Preamp volume level (0)
20221029 222048 worker: MPD volume level (100) restored
20221029 222048 worker: ALSA Pre Box S2 Digital volume (100%)
20221029 222048 worker: Auto-play (Off)
20221029 222048 worker: CoverView toggle (-off)
20221029 222048 worker: On-screen keyboard (Off)
20221029 222048 worker: Library scope (all)
20221029 222048 worker: Maintenance interval (360 minutes)
20221029 222048 worker: Screen saver activation (Never)
20221029 222048 worker: Session permissions (OK)
20221029 222048 worker: Mount monitor started
20221029 222048 worker: Watchdog started
20221029 222048 worker: Ready
20221030 041412 worker: Mount (mount -t cifs "//MYCLOUDEX2ULTRA/Public" -o username="admin",password="Argot22&",rsize=61440,wsize=65536,iocharset=utf8,vers=3.1.1,ro,noserverino,dir_mode=0777
,file_mode=0777 "/mnt/NAS/nuevo")

*******************************************************
AFTER REBOOT:

20221030 043307 worker: Try (mount -t cifs "//MYCLOUDEX2ULTRA/Public" -o username="admin",password="Argot22&",rsize=61440,wsize=65536,iocharset=utf8,ro,noserverino,dir_mode=0777,file_mode=0777 "/mnt/NAS/nuevo")
20221030 043307 worker: Err (mount error: could not resolve address for MYCLOUDEX2ULTRA: Unknown error)
20221030 043307 worker: Mount all submitted
20221030 043307 worker: --
20221030 043307 worker: -- Feature availability
20221030 043307 worker: --
20221030 043307 worker: Source select (available)
20221030 043307 worker: Source select (source: MPD)
20221030 043307 worker: Source select (output: Pre Box S2 Digital)
20221030 043307 worker: Bluetooth (available)
20221030 043307 worker: AirPlay renderer (available)
20221030 043307 worker: Spotify renderer (available)
20221030 043307 worker: Squeezelite (available)
20221030 043307 worker: RoonBridge renderer (not installed)
20221030 043307 worker: Multiroom sender (available)
20221030 043307 worker: Multiroom receiver (available)
20221030 043307 worker: UPnP renderer (available: started)
20221030 043307 worker: DLNA server (available)
20221030 043307 worker: GPIO button handler (available)
20221030 043307 worker: Stream recorder (n/a)
20221030 043307 worker: --
20221030 043307 worker: -- Other
20221030 043307 worker: --
20221030 043307 worker: USB volume knob (Off)
20221030 043307 worker: Shellinabox SSH started
20221030 043307 worker: USB auto-mounter (udisks-glue)
20221030 043307 worker: Saved MPD vol level (0)
20221030 043307 worker: Preamp volume level (0)
20221030 043308 worker: MPD volume level (100) restored
20221030 043308 worker: ALSA Pre Box S2 Digital volume (100%)
20221030 043308 worker: Auto-play (Off)
20221030 043308 worker: CoverView toggle (-off)
20221030 043308 worker: On-screen keyboard (Off)
20221030 043308 worker: Library scope (all)
20221030 043308 worker: Maintenance interval (360 minutes)
20221030 043308 worker: Screen saver activation (Never)
20221030 043308 worker: Session permissions (OK)
20221030 043308 worker: Mount monitor started
20221030 043308 worker: Watchdog started
20221030 043308 worker: Ready
20221030 043348 waitWorker(): Start (lib-config, w_active=0)
20221030 043348 waitWorker(): End (lib-config, w_active=0)

On first boot, run 'mount monitor started' option and add 'vers=3.1.1' parameter and all OK

After reboot, moode tries to mount the NAS, but without the parameter 'vers=3.1.1' and fails. Later don't try to mount NAS again after 'mount monitor started' option

Also I see: 20221030 041412 worker: Mount (OK Green tick) VS 20221030 043307 worker: Try (Fails Red Cross). That is, there are differences between the mount and try command.

Thanks in advance and happy sunday.

Login
Username:
Password:	Lost Password?
	Remember me