02-07-2023, 02:06 PM
Thanks for chiming in, so far I have enabled Bluetooth for the odd occasion, UPnP and both work well so far. I won't touch DSP as the whole setup immediately becomes unresponsive.
So simply streaming via UPnP with no DSP, this is the audio info I get and I am wondering if the original bit depth was 24bit or did this change when being decoded?
Also, who makes those changes you can see in the output rate ? I assume its the DAC on its own?
INPUT / OUTPUT
Sourcehttp://192.168.8.156:57645/external/audio/media/40025.m4a
Encoded atUnknown
Decoded to24 bit, 44.1 kHz, Stereo, 128 kbps
Output rate32 bit, 44.1 kHz, Stereo, 2.822 Mbps
Output modeALSA Default (plughw)
Output chainMPD -> plughw -> Device
So simply streaming via UPnP with no DSP, this is the audio info I get and I am wondering if the original bit depth was 24bit or did this change when being decoded?
Also, who makes those changes you can see in the output rate ? I assume its the DAC on its own?
INPUT / OUTPUT
Sourcehttp://192.168.8.156:57645/external/audio/media/40025.m4a
Encoded atUnknown
Decoded to24 bit, 44.1 kHz, Stereo, 128 kbps
Output rate32 bit, 44.1 kHz, Stereo, 2.822 Mbps
Output modeALSA Default (plughw)
Output chainMPD -> plughw -> Device
Listening with the latest moOde on a RPI zero w with a MiniBoss DAC PCM5122 32bit 384kHz and a Volt+ AMP on a pair of Monitor Audio Bronze 100 speakers.
pi@moody:~ $ moodeutl -m
CPU: 1.0 GHz, LOAD: 35% 47C | MEM: 63% used | DISK: 39% used, 4.1G free | PHP: 7 workers
pi@moody:~ $ moodeutl -m
CPU: 1.0 GHz, LOAD: 35% 47C | MEM: 63% used | DISK: 39% used, 4.1G free | PHP: 7 workers
