Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Booting from NVMe drive (In Argon40 case)
#19
(02-18-2023, 01:50 PM)Sehnsucht Wrote: Looks like it can see the device sda but no partition on it.

Code:
pi@somebox:~ $ sudo lsblk
NAME        MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda           8:0    0  3.6T  0 disk 
└─sda1        8:1    0  3.6T  0 part /media/USB4tbMusic
mmcblk0     179:0    0 29.7G  0 disk 
├─mmcblk0p1 179:1    0  256M  0 part /boot
└─mmcblk0p2 179:2    0 29.5G  0 part /

Is there anything in /var/log/syslog relating to a failure to mount one?

Code:
pi@somebox:~ $ sudo blkid
/dev/mmcblk0p1: LABEL_FATBOOT="boot" LABEL="boot" UUID="A248-68DA" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="86ac5767-01"
/dev/mmcblk0p2: LABEL="rootfs" UUID="2c4ec460-c619-4347-ba40-ca4b1780056e" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="86ac5767-02"
/dev/sda1: LABEL="USB4tbMusic" UUID="2577a29d-d425-4f6e-a43b-b79a95ed503b" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="e2fe89d7-142f-4649-9f62-c1d671e3640f"


Probably unrelated but slightly odd perhaps that you have RaspiOS 11.5 and mine's 11.6 but we're both on the same version of moOde.  I've made a few changes to my install for infra-red support but I've not run apt-get upgrade. Maybe the different "Platform" explains it.


Code:
20230218 111024 worker: moOde     (8.2.5 2023-01-20)
20230218 111024 worker: RaspiOS   (11.6)
20230218 111024 worker: Kernel    (5.15.84-v8+ #1613)
20230218 111024 worker: Platform  (Pi-4B 1.1 2GB)
20230218 111024 worker: ARM arch  (aarch64, 64-bit)
20230218 111024 worker: MPD ver   (0.23.11)
Thanks very much for getting back here...I'm struggling!

I'd just run update and apt-get upgrade before your reply....so I'm now on 11.6 Smile

Not sure what this is showing...sudo blkid....but thought I'd run it anyway


pi@moode:~ $ sudo blkid
/dev/mmcblk0p1: LABEL_FATBOOT="boot" LABEL="boot" UUID="3EEE-AE80" BLOCK_SIZE12" TYPE="vfat" PARTUUID="d73bf2fe-01"
/dev/mmcblk0p2: LABEL="rootfs" UUID="5aa7cb8c-b4db-4189-9f63-56460b5fd7ef" BL_SIZE="4096" TYPE="ext4" PARTUUID="d73bf2fe-02"

I don't know how to look in /var/log/syslog I'm afraid Sad
Reply


Messages In This Thread
RE: Booting from NVMe drive (In Argon40 case) - by Tonewheelkev - 02-18-2023, 02:31 PM

Forum Jump: