03-07-2023, 11:11 AM
(03-03-2023, 10:38 PM)Venerdi Wrote: Hi All,
I have another question.
At home I have a WiFi that has a Repeater.
The SSID name is the same, so when MoOde scans the available networks, it finds two SSIDs with the same name and I don't understand which one it connects to.
I have to use the same name for a problem with IPCam.
When MoOde scans, would it be possible to view the signal strength, as is normally the case on smartphones?
thx
v.
Hi,
In addition to Tim's comment, which AP has the best wifi signal on the location of the MoOde device? I'm not clear on that based on your post.
If it's the main wifi (so not the repeater), you can just temporary shut down the repeater and let MoOde connect to main wifi AP. Afterwards when you turn on the repeater again it should stay connected to the main AP.
If your repeater has the best wifi signal it's a bit more tricky, will the repeater keep its current name when you change the SSID of the main AP? If so, you can temporary change SSID of the main AP, let MoOde connect to the repeater and then change back the main AP.
Only thing I do not know is if MoOde checks for internet connection upon repeater wifi internet connection, as this will most likely be lost when you change the main wifi AP's SSID....
