Hi,
moOde 8.3.0 is available for download at moodeaudio.org :-)
![[Image: attachment.php?thumbnail=2728]](https://moodeaudio.org/forum/attachment.php?thumbnail=2728)
This release is based on RaspiOS Bullseye Lite most recent packages as of 2023-03-14, Linux kernel 5.15.84, our suite of custom drivers and patches, and important updates and bug fixes as listed below.
New Features
The ISO image does not contain the userid pi, SSH service, WiFi SSID or
Access Point password. Refer to the moOde Setup Guide for details on how
to set these up.
NOTE: Until the next release always set the userid to pi otherwise some services
won't start for example xserver that the Local Display function depends on.
Updates (highlights)
There is an in-place update available via the "CHECK for software update" button in System Config. Click the "VIEW" button to read about the contents of the update package and the instructions regarding backing up the system before applying the update and monitoring the progress of the update via the command moodeutl -t
NOTE: After the update completes and a Restart is initiated, close the Browser tab. This will avoid a situation where the System Config screen submits a second update request when it auto-refreshes. It's harmless but does cause additional time before the system becomes ready. This will not be an issue in 8.3.0 and later releases.
** HELP SUPPORT THE PROJECT BY DONATING **
Take a moment and make a donation to show your appreciation for the effort and dedication that goes into developing and supporting moOde audio player. Your donation helps to ensure the moOde project is able to continue to make great audio software for the wonderful Raspberry Pi audio community :-)
Regards,
The moOde crew
Release notes
moOde 8.3.0 is available for download at moodeaudio.org :-)
This release is based on RaspiOS Bullseye Lite most recent packages as of 2023-03-14, Linux kernel 5.15.84, our suite of custom drivers and patches, and important updates and bug fixes as listed below.
New Features
- Volume type "CamillaDSP" software volume (64-bit with dither)
- CamillaDSP Loudness, Volume Control and Polarity Inversion configs
- Use ALSA instead of MPD to control Hardware volume
- Monitor in-place update via WebUI Status screen instead of SSH
- ProtoDAC TDA1387 X8 (I2S)
The ISO image does not contain the userid pi, SSH service, WiFi SSID or
Access Point password. Refer to the moOde Setup Guide for details on how
to set these up.
NOTE: Until the next release always set the userid to pi otherwise some services
won't start for example xserver that the Local Display function depends on.
Updates (highlights)
- Bump to MPD 0.23.12
- Bump to bluez-alsa 4.0.0
- Add ALSA buffer_time option to MPD Config
- Add WPA3-Personal Transition Mode to Network Config
- Improve WiFi section in startup (faster AP mode activation)
- Mapped ALSA volume not being used to set ALSA volume max
- Allo Piano 2.1 mixer name "Digital" no longer used by driver
- Audioinfo does not report renderer info
- Error not logged when source mount fails
- Wrong PSK used in saved SSID's
There is an in-place update available via the "CHECK for software update" button in System Config. Click the "VIEW" button to read about the contents of the update package and the instructions regarding backing up the system before applying the update and monitoring the progress of the update via the command moodeutl -t
NOTE: After the update completes and a Restart is initiated, close the Browser tab. This will avoid a situation where the System Config screen submits a second update request when it auto-refreshes. It's harmless but does cause additional time before the system becomes ready. This will not be an issue in 8.3.0 and later releases.
** HELP SUPPORT THE PROJECT BY DONATING **
Take a moment and make a donation to show your appreciation for the effort and dedication that goes into developing and supporting moOde audio player. Your donation helps to ensure the moOde project is able to continue to make great audio software for the wonderful Raspberry Pi audio community :-)
Regards,
The moOde crew
Release notes
Code:
################################################################################
#
# 2023-03-14 TC moOde 8.3.0
#
################################################################################
New Features
- NEW: Volume type "CamillaDSP" software volume (64-bit with dither)
- NEW: CamillaDSP Loudness, Volume Control and Polarity Inversion configs
- NEW: Use ALSA instead of MPD to control Hardware volume
- NEW: Monitor in-place update via WebUI Status screen instead of SSH
Audio devices
- NEW: ProtoDAC TDA1387 X8 (I2S)
Security (new image only)
- UPD: The ISO image does not contain the userid pi, SSH service, WiFi SSID or
Access Point password. Refer to the moOde Setup guide for details on
how to set these up.
Updates
- UPD: Bump to MPD 0.23.12
- UPD: Bump to bluez-alsa 4.0.0
- UPD: Add CamillaDSP volume support to Airplay and Spotify Connect
- UPD: Add ALSA buffer_time option to MPD Config
- UPD: Add WPA3-Personal Transition Mode to Network Config
- UPD: Add Home button to configs header (returns to Playback view)
- UPD: Add quick jump indexes back to Pi Touch
- UPD: Add AlbumArtist to ashuffle mode to handle same name albums
- UPD: Add moodeutl option for printing ALSA hwparams
- UPD: Add System Config option for downloading the Startup log
- UPD: Improve readability of Receivers modal
- UPD: Improve help text and labels in CamillaDSP Config
- UPD: Improve viewswitch tabs in configs (use icons for mobile)
- UPD: Improve Airplay protocol option
- UPD: Improve WiFi section in startup (faster AP mode activation)
- UPD: Sync CoverView auto and toggle during startup
- UPD: Move Metadata file option to MPD section of Audio Config
- UPD: Update Chip Options help for Piano 2.1 DAC Stereo mode
- UPD: Sort the output from the Wifi SCAN
- UPD: Setup guide to reflect new security information
Bug fixes
- FIX: Session ID missing in moodeutl -i (autocfg-import.php)
- FIX: Mapped ALSA volume not being used to set ALSA volume max
- FIX: Allo Piano 2.1 mixer name "Digital" no longer used by driver
- FIX: Audioinfo does not report renderer info
- FIX: Default thumb image not showing in Queue for UPnP files
- FIX: Format of auto_coverview value in System info
- FIX: Error not logged when source mount fails
- FIX: Wrong PSK used in saved SSID's