03-18-2023, 02:27 PM
Thanks for the instructions, here we go:
steps 1 through 6: all OK.
step 7: ok, but the pipeline is at 100% and 0dB, music audible.
8: ok
9: ok
0: state file shows -51 in stead of -40.
A: ok
B: ok
C1: ok
C2: slider goes to 100%, 0dB. Volume state file is -40.
It looks like the saved Volume state is not applied for some reason.
Apart from this I noticed that when I switch CamillaDSP off via the menu dropdown, the system's Audio Output setting goes to "Hardware", it would be nice if it would remember the old value (which was "Software").
Code:
Last login: Sat Mar 18 14:37:05 2023 from 192.168.2.189
pi@moode:~ $ ls -l /var/lib/cdsp/camilladsp_volume_state
-rw-r--r-- 1 mpd root 21 Mar 18 14:50 /var/lib/cdsp/camilladsp_volume_statesteps 1 through 6: all OK.
step 7: ok, but the pipeline is at 100% and 0dB, music audible.
8: ok
9: ok
0: state file shows -51 in stead of -40.
A: ok
B: ok
C1: ok
C2: slider goes to 100%, 0dB. Volume state file is -40.
It looks like the saved Volume state is not applied for some reason.
Apart from this I noticed that when I switch CamillaDSP off via the menu dropdown, the system's Audio Output setting goes to "Hardware", it would be nice if it would remember the old value (which was "Software").
