03-18-2023, 04:16 PM
(03-18-2023, 02:27 PM)ycdtosa Wrote: Thanks for the instructions, here we go:
Code:Last login: Sat Mar 18 14:37:05 2023 from 192.168.2.189
pi@moode:~ $ ls -l /var/lib/cdsp/camilladsp_volume_state
-rw-r--r-- 1 mpd root 21 Mar 18 14:50 /var/lib/cdsp/camilladsp_volume_state
steps 1 through 6: all OK.
step 7: ok, but the pipeline is at 100% and 0dB, music audible.
8: ok
9: ok
0: state file shows -51 in stead of -40.
A: ok
B: ok
C1: ok
C2: slider goes to 100%, 0dB. Volume state file is -40.
It looks like the saved Volume state is not applied for some reason.
Apart from this I noticed that when I switch CamillaDSP off via the menu dropdown, the system's Audio Output setting goes to "Hardware", it would be nice if it would remember the old value (which was "Software").
Very odd.
When the discrepancies occur what does the status of the volume proxy show?
Code:
systemctl status mpd2cdspvolume