[SOLVED] Moode 8.3.0 RPi 1B+ - UPnP-Renderer doesnt show up

[Tim Curtis]

Unfortunately, that is not the solution either.

I have an OPNsense firewall here.
I have already restarted this several times.
I also have a BubbleUPnP server on the same subnet as the Moode player. This shows all other UPnP renderers in the subnet.
I had also reset and restarted this.
With the Raspberry Pi 1 with the Moode 8.3.0 I had also done the described steps.
The control points were also restarted several times.

The other UPnP players are a Moode 8.1.2, the same Raspberry with Moode 6.4.1 before, a Grundig internet radio, a Pioneer receiver and its renderer proxified via the BubbleUPnP server.

The UPnP control points are all Android devices (11-13) with the BubbleUPnP app.

In the meantime, I specified a value for the upnplogfilename parameter in the upmpdcli configuration, set the loglevel to 5 and the upnploglevel to 4.

The logfile created with this is in the attachment.

I don't see anything in the upmpdcli startup log that relates to network errors. UPnP uses IP Multicast for discovery and announcement https://en.wikipedia.org/wiki/Simple_Ser...y_Protocol so you may want to check your Firewall device and servers to make sure there are no explicit deny rules for this protocol or its address space.

Since moOde just uses the standard Debian package for upmpdcli I think your best bet might be to view the upmpdcli maintainers repo to see if there any similar issues, and then post your specific issue.
https://framagit.org/medoc92/upmpdcli/activity

I'd post version of upmpdcli, the contents of the conf file and your debug log. 

Package version.

Code:

pi@moode:~ $ dpkg -l | grep upmpdcli
hi  upmpdcli   1.5.12-1moode1    arm64    UPnP Media Renderer front-end to MPD, the Music Player Daemon

Default conf file. 
Post your conf file if it's different than the default file.

Code:

pi@moode:~ $ cat /etc/upmpdcli.conf
#The XML tags in the comments are used to help produce the documentation
#from the sample/reference file, and not at all at run time, where
#comments are just comments. Edit at will.
#The command line options have higher priorities than the values in
#this file.

# Upmpdcli configuration


# Upmpdcli general parameters

# Log file name.
#logfilename =
# Log level.
#loglevel = 2
# XML and other constant data storage directory.
#pkgdatadir=/usr/share/upmpdcli
# Name of lock file used to store the current process pid.
#pidfile = /var/run/upmpdcli.pid

# UPnP network parameters

# Network interface to use for UPnP.
#upnpiface =
# IP address to use for UPnP, alternative to using an interface name.
#upnpip =
# Port number used for UPnP.
#upnpport =
# Enable use of IPV6.
#useipv6 = false

# Media Renderer parameters

# "Friendly Name" for the Media Renderer.
friendlyname = Moode UPNP
# Specific friendly name for the UPnP/AV Media Renderer.
avfriendlyname = Moode UPNP
# Enable UPnP AV services (0/1).
upnpav = 1
# Enable OpenHome services (0/1).
openhome = 0
# Disable the OpenHome Credentials service.
#lumincompat = 0
# Store metadata into the OpenHome "metatext" variable.
#ohinfotexttodata = 0
# Save the streaming services login parameters to disk.
#saveohcredentials = 1
# Check that input format is supported.
checkcontentformat = 1
# Path to the openssl command
#opensslcmd =
# Path to the Renderer icon.
iconpath = /usr/share/upmpdcli/moode_audio.png
# Directory used to store cached data
#cachedir = /var/cache/upmpdcli
# Path to the presentation HTML document
#presentationhtml = /usr/share/upmpdcli/presentation.html
# Advertise L16 format support
#enablel16 = false

# MPD parameters

# Host MPD runs on.
#mpdhost = localhost
# IP port used by MPD
#mpdport = 6600
# MPD password.
#mpdpassword =
# MPD connection timeout in milliseconds.
#mpdtimeoutms = 2000
# Set if we own the MPD queue.
#ownqueue = 1

# Audio control hooks

# Command to run when playback is about to begin.
#onstart =
# Command to run when MPD state switches to "PLAY".  
#onplay =
# Command to run when MPD state switches to "PAUSE".  
#onpause =
# Command to run when MPD state switches to "STOP".
#onstop =
# Command to run when the setstandby action is called.
#onstandby =
# Use external command to manage the the sound volume (0/1).
#externalvolumecontrol =
# Command to run for reading the sound volume.
#getexternalvolume =
# Command to run to set the volume.
#onvolumechange =

# UPnP/AV tweaking

# Automatically fake a Play command when track is set.
#avtautoplay = 0

# OpenHome parameters

# The name of the room where the Product is located.
ohproductroom = Moode UPNP
# Path to an external file with radio definitions.
radiolist = /usr/share/upmpdcli/radio_scripts/radiolist.conf
# Radio metadata scripts directory.
#radioscripts = /usr/share/upmpdcli/radio_scripts
# Manufacturer name.
#ohmanufacturername = UpMPDCli heavy industries Co.
# Manufacturer information.
#ohmanufacturerinfo = Such nice guys and gals
# URL for manufacturer web site.
#ohmanufacturerurl = http://www.lesbonscomptes.com/upmpdcli
# Uri for manufacturer’s logo.
#ohmanufacturerimageuri =
# Model name.
#ohmodelname = UpMPDCli UPnP-MPD gateway
# Model information.
#ohmodelinfo =
# URL for model web site.
#ohmodelurl = http://www.lesbonscomptes.com/upmpdcli
# Uri for model’s icon.
#ohmodelimageuri =
# User-visible product name. By default this is set to ModelName.
#ohproductname = Upmpdcli
# Product information.
#ohproductinfo =
# URL for product web site. This may be the UPnP presentation page.
#ohproducturl =
# Uri for product image.
#ohproductimageuri =
# Save queue metadata to disk (0/1).
#ohmetapersist = 1
# Mimimum interval (Seconds) between two cache saves.
#ohmetasleep = 0

# Media Server general parameters

# Friendly name for the Media Server (if enabled).
#msfriendlyname =
# Hostname/IP address used in proxy URLs.
#plgmicrohttphost =
# IP port for the tidal/qobuz local HTTP service.
#plgmicrohttpport = 49149
# Decide if we proxy (copy: fetch/serve), or redirect the streaming services streams.
#plgproxymethod = redirect
# Path to the Media Server icon.
#msiconpath = /usr/share/upmpdcli/icon.png

# Highresaudio streaming service parameters

# Hra user name.
#hrauser = your hra user name
# Hra password.
#hrapass = your Hra password
# Hra language setting (en/de).
#hralang = en

# Spotify streaming service parameters

# Spotify user name.
#spotifyuser = me@some.place
# Spotify password.
#spotifypass = agoodpassword
# Spotify preferred bitrate: 160 (default), 320 or 96.
#spotifybitrate = 160

# Tidal streaming service parameters

# Tidal user name.
#tidaluser = your tidal user name
# Tidal password.
#tidalpass = your Tidal password
# Tidal API token.
#tidalapitoken = thetoken
# Tidal stream quality.
#tidalquality = low

# Qobuz streaming service parameters

# Qobuz user name.
#qobuzuser = me@some.place
# Qobuz password.
#qobuzpass = agoodpassword
# Qobuz stream quality.
#qobuzformatid = 5

# Deezer streaming service parameters

# Deezer user name.
#deezeruser = me@some.place
# Deezer password.
#deezerpass = agoodpassword

# Local Media Server parameters

# Bogus user name variable.
#uprcluser = bugsbunny
# Plugin Title.
#uprcltitle = Local Music
# HTTP host and port for serving media files
#uprclhostport =
# uprcl Recoll index directory
#uprclconfdir = /var/cache/upmpdcli/uprcl
# Name of the user Recoll config additions file
#uprclconfrecolluser = /var/cache/upmpdcli/uprcl/recoll.conf.user
# Name of the Minim Server configuration file
#uprclminimconfig =
# Media directories
#uprclmediadirs = /tmp
# Path translations.
#uprclpaths =

# Songcast Receiver parameters

#Parameters for the Songcast modes. These are read by either/both the
#songcast and upmpdcli processes
# Log file name for sc2mpd (default stderr)
#sclogfilename =
# Log verbosity for sc2mpd.
#scloglevel = 3
# sc2mpd play method (mpd/alsa).
#scplaymethod = mpd
# Port used by sc2mpd for MPD to connect to.
#schttpport = 8768
# Alsa device used by sc2mpd for playing audio.
#scalsadevice = default
# sc2mpd resampling method.
#sccvttype = SRC_SINC_FASTEST
# Scale songcast stream based on mpd volume value
#scusempdvolume = 0
# Path to sc2mpd.
#sc2mpd =
# Path to a screceiver state file.
#screceiverstatefile =

# Songcast Sender parameters

#Parameters tor the Sender/Receiver mode. Only does anything if
#scplaymethod is alsa
# !!Standard Songcast receivers only support PCM!! Codec to use for the network stream.
#scstreamcodec =
# Path to starter script
#scsenderpath =
# Scale the Songcast stream.
#scstreamscaled = 1
# localhost port to be used by the auxiliary mpd.
#scsendermpdport = 6700
# External sources script directory.
#scripts_dir = /usr/share/upmpdcli/src_scripts
# Grace period to wait for a script process to exit before it is forcely killed.
#scscriptgracesecs = 2

Your debug log.

Code:

:4:src/mpdcli.cxx:131::MPDCLi::openconn: mpd protocol version: 0.23.5
:4:src/mpdcli.cxx:140::MPDCli::startEventLoop
:4:libupnpp/upnpplib.cxx:208::LibUPnP: serveronly 1 ifnames [] inip [] port 0
:4:src/mpdcli.cxx:189::MPDCli::pollerCtl: mpd is not playing
:3:libupnpp/upnpplib.cxx:244::LibUPnP: Using IPV4 10.20.20.52 port 49152 IPV6  port 49152
:4:libupnpp/device/device.cxx:541::UpnpDevice::addService: [urn:av-openhome-org:serviceId:Time]
:4:libupnpp/device/device.cxx:541::UpnpDevice::addService: [urn:av-openhome-org:serviceId:Volume]
:4:libupnpp/device/device.cxx:541::UpnpDevice::addService: [urn:av-openhome-org:serviceId:Credentials]
:4:src/execmd.cpp:472::ExecCmd::startExec: (0|1) openssl {rsa} {-in} {/var/cache/upmpdcli/ohcreds/credkey.pem} {-RSAPublicKey_out}
:5:src/netcon.cpp:372::Netcon::selectloop: fd 12 has 0x0 mask, erasing
:5:src/execmd.cpp:831::ExecCmd::doexec: selectloop returned 0
:4:src/execmd.cpp:997::ExecCmd::wait: got status 0x0
:5:src/conftree.cpp:240::ConfSimple::ConfSimple: fstream(w)(/var/cache/upmpdcli/ohcreds/screds, 8) errno 2
:4:src/ohcredentials.cxx:345::OHCredentials: error opening for read (probably not an error)/var/cache/upmpdcli/ohcreds/screds errno 2
:4:libupnpp/device/device.cxx:541::UpnpDevice::addService: [urn:av-openhome-org:serviceId:Playlist]
:4:src/ohplaylist.cxx:123::ohPlaylist: cache restore done
:4:libupnpp/device/device.cxx:541::UpnpDevice::addService: [urn:av-openhome-org:serviceId:Radio]
:4:libupnpp/device/device.cxx:541::UpnpDevice::addService: [urn:av-openhome-org:serviceId:Info]
:4:libupnpp/device/device.cxx:541::UpnpDevice::addService: [urn:av-openhome-org:serviceId:Product]
:5:src/ohproduct.cxx:122::OHProduct::OHProduct: sources: <SourceList><Source><Name>Playlist</Name><Type>Playlist</Type><Visible>true</Visible><SystemName>Playlist</SystemName></Source><Source><Name>Radio</Name><Type>Radio</Type><Visible>true</Visible><SystemName>Radio</SystemName></Source></SourceList>
:4:libupnpp/device/device.cxx:541::UpnpDevice::addService: [urn:upnp-org:serviceId:ContentDirectory]
:4:libupnpp/device/device.cxx:541::UpnpDevice::addService: [urn:upnp-org:serviceId:ConnectionManager]
:4:src/main.cxx:211::Media server event loop
:4:src/main.cxx:785::Renderer event loop