In place update to 8.3.2 failure....Now re-installed!

[TheOldPresbyope]

Here I am again!
Selected the in place update....from 8.3.0 to 8.3.2, and this time did a backup before proceeding.


After rebooting....have the same problem I experienced on attempting to update to 8.3.1 earlier this week.
I can reach the config page.....but then can't access anything on that page.

So can't even reinstate the 8.3.0 working install......

I must be doin' something wrong???

It occurs that I should add....Rpi4 connected via USB to Topping E50.....just noticed Shutdown not working either.

I am unable to repro the behavior you describe.

My test case: Pi4B with 64bit moOde 8.3.0 freshly installed. Checked the availability of a software update, and executed it.

The update process took a little more than 5 minutes over a WiFI connection to my cable company's router. About 3 of those minutes were spent just in updating the kernel. Here's the log I grabbed from the command line

Code:

pi@moode:~ $ moodeutl -t
4 152807 worker: HTTPS-Only mode (n/a)
20230314 152807 worker: --
20230314 152807 worker: -- Other
20230314 152807 worker: --
20230314 152807 worker: USB volume knob (Off)
20230314 152807 worker: USB auto-mounter (udisks-glue)
20230314 152807 worker: Saved MPD vol level (0)
20230314 152807 worker: Preamp volume level (0)
20230314 152807 worker: MPD volume level (0) restored
20230314 152807 worker: ALSA HDMI volume (0%)
20230314 152807 worker: Auto-play (Off)
20230314 152807 worker: LocalUI (Off)
20230314 152807 worker: Automatic CoverView (Off)
20230314 152807 worker: On-screen keyboard (Off)
20230314 152807 worker: Library scope (all)
20230314 152807 worker: View reset to playback
20230314 152807 worker: Maintenance interval (360 minutes)
20230314 152807 worker: Screen saver activation (Never)
20230314 152807 worker: Session permissions retry (1)
20230314 152809 worker: Session permissions (OK)
20230314 152809 worker: Mount monitor (Off)
20230314 152809 worker: Watchdog started
20230314 152809 worker: Ready
20230422 142945 worker: Job install_update
20230422 142945 updater: Downloading package [update-moode.zip]
20230422 142945 updater: Start 2023-04-21 update for moOde
20230422 142945 updater: ** Step 1-22: Remove package hold
20230422 142946 updater: ** Step 2-22: Update package list
20230422 142952 updater: ** Step 3-22: Install timesyncd
20230422 142954 updater: ** Step 4-22: Update Linux kernel to 6.1.21
20230422 142954 updater: ** - Updating...
20230422 142954 updater: ** - Prepare environment
20230422 143024 updater: ** - Install kernel
20230422 143303 updater: ** - Install bootloader
20230422 143327 updater: ** - Install custom drivers
20230422 143352 updater: ** - Complete
20230422 143352 updater: ** Step 5-22: Install moode-player=8.3.2-1moode1
20230422 143401 updater: ** Step 6-22: Install bluez-alsa=4.0.0-2moode1
20230422 143403 updater: ** Step 7-22: Install bluez-alsa-utils=4.0.0-2moode1
20230422 143411 updater: ** Step 8-22: Install libasound2-plugin-bluez=4.0.0-2moode1
20230422 143416 updater: ** Step 9-22: Install camilladsp=1.0.3-1moode1
20230422 143420 updater: ** Step 10-22: Install camillagui=1.0.1-1moode1
20230422 143423 updater: ** Step 11-22: Install python3-camilladsp-plot=1.0.2-1moode1
20230422 143427 updater: ** Step 12-22: Install mpd2cdspvolume=0.3.1-1moode1
20230422 143433 updater: ** Step 13-22: Install mpd=0.23.12-1moode1
20230422 143437 updater: ** Step 14-22: Install python3-mpd2=3.0.5
20230422 143440 updater: ** Step 15-22: Install shairport-sync=4.1.1-1moode1
20230422 143448 updater: ** Step 16-22: Install python3-libupnpp=0.21.0-1moode1
20230422 143457 updater: ** Step 17-22: Install libnpupnp2=5.0.1-1moode1
20230422 143459 updater: ** Step 18-22: Install libupnpp7=0.22.4-1moode1
20230422 143501 updater: ** Step 19-22: Install upmpdcli=1.7.7-1moode1
20230422 143507 updater: ** Step 20-22: Apply package hold
20230422 143507 updater: ** Step 21-22: Post-install cleanup
20230422 143508 updater: ** Step 22-22: Sync changes to disk
20230422 143508 updater: Finish 2023-04-21 update for moOde
20230422 143508 updater: Update installed, restart required

You did wait long enough for the update process to complete, right?

I rebooted and moOde 8.3.2 is now running. I can (re)configure it, play tracks, shut it down, reboot it, yada yada yada.

Sorry, I don't know what to advise you to do.

ETA - Of course you can return to a fresh install of 8.3.0 and apply the configuration backup you made.

Regards,
Kent