In place update to 8.3.2 failure....Now re-installed!

[Tim Curtis]

The Setup guide explains what is necessary for preparing an image for first boot. This was also mentioned in the various announcement posts about improved security starting with 8.3.0.

Link to Setup guide
https://github.com/moode-player/moode/bl.../setup.txt

[url=https://github.com/moode-player/moode/blob/master/www/setup.txt][/url]Relevant security section

Code:

OS IMAGE AND SECURITY

The OS image does not contain the userid pi, SSH service, WiFi SSID or Access
Point password.

- Use the official Raspberry Pi Imager to choose a moOde OS image, enable SSH,
 create the pi userid and password and optionally a WiFi SSID and password.
 The moOde OS images are listed in the "Media Player OS" category or if they
 were downloaded directly via the Download page at http://moodeaudio.org they
 can be selected via the "Use custom" category.

- Refer to the links below for more information on operating system security
 and how to download and use the Raspberry Pi Imager.
 https://www.raspberrypi.com/software/
 https://www.raspberrypi.com/news/raspberry-pi-bullseye-update-april-2022/

- The Access Point password can be entered via the WebUI, Network Config screen
 after the system starts or via an edited /boot/moodecfg.ini file. The file is
 described in this document in the CUSTOM CONFIGURATION section.

To access the operating system command console use Secure Shell (SSH). An easy
to use WebSSH terminal is available in System Config.