Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Which local display screens work with moOde?
#7
(06-04-2023, 03:03 PM)Tim Curtis Wrote:
(06-04-2023, 02:51 PM)steve4star Wrote:
(06-03-2023, 10:02 PM)inthemoode Wrote: When you say you use the 5" version - do you mean you have this same brand in a 5" version, or just another 5" screen with the same interface?

In the past I tried a very small cheap screen that just plugged into the header on the rPi - i.e. it didn't use a ribbon cable to the display connector.  It worked for the raspberry pi operating system, by moOde did not support it.   This is a big part of my question.  Exactly what screens are supported?
Yes, I have the following:
Freenove 5 Inch Touchscreen Monitor for Raspberry Pi, 800x480 Pixel IPS Display, 5-Point Touch Capacitive Screen, Driver-Free DISPLAY Port

Does the screen require any settings in /boot/config.txt or other files?


It says no config is required, 
"

  • Easy to use -> No configuration is required (for new and configuration-unchanged systems)."



but there is a small note at the bottom of this image about commenting out a line in config.txt if it doesn't work first time

[Image: 710PksyoD5L._AC_SX425_.jpg]
Reply


Messages In This Thread
RE: Which local display screens work with moOde? - by inthemoode - 06-04-2023, 10:22 PM

Forum Jump: