06-06-2023, 03:38 AM
@Skip Pack - It's true that some side cutters apply excess shock to a solder joint when trimming leads. I find Xuron Micro-Shear Flush Cutter best for PCB work. Solder then clip. No need to re-flow.
https://www.amazon.com.au/Xuron-170-II-M...6464&psc=1
It's also good practise to remove flux with Isopropyl alcohol and do a final visual with a loupe as @hifinet suggests.
Richard
https://www.amazon.com.au/Xuron-170-II-M...6464&psc=1
It's also good practise to remove flux with Isopropyl alcohol and do a final visual with a loupe as @hifinet suggests.
Richard