ProtoDAC TDA1387 X8 project

[Skip Pack]

@Skip Pack - It's true that some side cutters apply excess shock to a solder joint when trimming leads. I find Xuron Micro-Shear Flush Cutter best for PCB work. Solder then clip. No need to re-flow.

https://www.amazon.com.au/Xuron-170-II-M...6464&psc=1 

It's also good practise to remove flux with Isopropyl alcohol and do a final visual with a loupe as @hifinet suggests.
Richard

Thanks to all for your responses. I'll pick up some of the recommended cutters. I always do the alcohol cleanup of flux, so that's good.

Skip