PeppyMeter and moOde

[fdealexa]

Hi Rajiv,
1) this is a reccomendation by Tim Curtis:
"Starting with release 8.3.0 we adopted the RaspiOS Bullseye security enhancements and our release images do not contain default userid/password, SSH or AP mode password.
You can use the Raspberry Pi Imager to easily enable SSH, create a userid/password and optionally a WiFi SSID/password. You can also use dd or any other image writer but the security prep has to be done manually.
Your best bet is to read the moOde Setup Guide".
That means that you have to setup User e password for SSH with the "Raspberry Pi Imager", as I normally use. an alternative is to follow the following thread: HowTo: install moOde without using the RPi Imager tool.
2) I already answered to this question on the DIYAudio forum (link to thread); this is the answer:"Hi, About the second question: the process for version 7.2 is still valid. Take care because Boss 2 has a problem with linux 6.1. On the moode forum there is a workaround to solve it. If any problem do not hesitate to ask. On moode forum there is a dedicated thread."
3) I don't see any problem with the described configuration.

I repeat: If any problem do not hesitate to ask. 

Best regards and good luck,
Francesco