[SOLVED] Moode 8.3.3 in place update not possible

[Tim Curtis]

@pkdick 

What Tim said.

As well, the filesystem info we were looking at in that particular stanza is parsed by the moOde sysinfo.sh script from the output of the Linux df command. Could you please go to your moOde player's command line (either using moOde's Web SSH terminal or by ssh'ing from another host), execute the following two commands, and report the results?

Code:

df -h
lsblk

Here, for example, is what I get on the 32-bit moOde 8.3.3 player I mentioned before,

Code:

pi@moode:~ $ df -h
Filesystem             Size  Used Avail Use% Mounted on
/dev/root              3.4G  2.7G  545M  84% /
devtmpfs               182M     0  182M   0% /dev
tmpfs                  214M     0  214M   0% /dev/shm
tmpfs                   86M  936K   85M   2% /run
tmpfs                  5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1         253M   51M  202M  20% /boot
tmpfs                   43M     0   43M   0% /run/user/1000
10.0.0.2:/export/Test  230G  161G   69G  70% /mnt/NAS/OMV-Test
pi@moode:~ $ lsblk
NAME        MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
mmcblk0     179:0    0  3.7G  0 disk
├─mmcblk0p1 179:1    0  256M  0 part /boot
└─mmcblk0p2 179:2    0  3.5G  0 part /

The moOde script is looking specifically for a "/dev/root" entry.

Regards,
Kent

Hello Kent,

Sorry for the delay.

Please find the info you asked from me (it seems exactly the same as you).

For Tim: my µSD size is 64 GB.

Thank you for your support!

In your screenshot under the File system heading the line starting with /dev/root does not appear. This identifies the root partition and is what is used to determine if there is enough free space for an update.

All stock moOde images contain this entry.