ProtoDAC TDA1387 X8 project

[hifinet]

I don't have a part number. I bought them years ago when I used them as sockets for the wire leads of subminature tubes. I was using these, but they were hard to find and expensive. I have ones is plastic DIPs like this or these in gold plating. The ones in the picture came mounted on a DIP metal frame carrier. The leads on the TX2575 and Panasonic caps are a very tight fit, requiring needle nose pliers for insertion. I also used them as sockets for the TDA1387 module on the protoboard HAT version. Machine pin socket seems to pull them up in an eBay search. Here is one on DigiKey.

I suppose the PCB should have 27.5mm pad spacing for radial MKC caps.