08-16-2023, 01:35 PM
(08-15-2023, 11:42 AM)Johnn18 Wrote: Hi
I have just reinstalled Moode on my raspberry pi 4. This is in an Argon one case with the Argon NVME ssd built in. Before I reinstalled it it worked flawlessly
If it was working flawlessly, why did you reinstall? What else changed besides performing the reinstall itself?
There's nothing special about the Argon case as far as moOde is concerned.
As it happens I have an RPi4B in an Argon One V.2 case with an 1TB NVME SSD Drive connected via an external USB3.0-NVME adapter (as opposed to via the USB3.0 bridge in the Argon One M.2 case).
All 64bit moOde revs from 7.something to 8.3.3 have installed and run "flawlessly" on it. If I find time I can try the 32bit "legacy" moOde just to be sure, but I don't expect anything suspicious would occur.
I suppose if all else fails you could clear the system logs, reboot, and then post the contents of /var/log/syslog and /var/log/kern.log (as attachments, please) so we could look for obvious problems.
Regards,
Kent
PS - I usually keep on hand a uSD card with straight Raspberry Pi OS installed on it that I use for forensic purposes.
