Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


RPi 4 8GB misfunctions with 8.3.6
#7
(09-22-2023, 11:03 PM)yellowruby Wrote:
(09-22-2023, 10:51 PM)Nutul Wrote:
(09-22-2023, 09:32 PM)yellowruby Wrote: I also tried loading 8.3.6 directly. I downloaded from both the moodeaudio.org Website and from github directly. In both cases, the checksums did not match what was posted. Burning an SD card from those distros likewise exhibited the same problems as I'm experiencing through the 8.3.0 to 8.3.6 upgrade route.

You DID use the image writer AND created a user + password BEFORE flashing it to the SD card, right?

I used Balena Etcher to create the SD card. I don't recall seeing any user or password options. I've used Balena Etcher in this same way before without issue. Sounds like I may be skipping a step? I'm wondering if the bad checksum is more the underlying problem. Thank you for the reply!

A quick test on my Mac and no issues with the checksums.

Code:
lt5user@LT5 Downloads % shasum -a 256 ./2023-09-05-moode-r836-arm64-lite.img
3084bd9d7a63ba81b3e4f81b965983327efb7a1cefe6f62895ac55282179c46e  ./2023-09-05-moode-r836-arm64-lite.img

lt5user@LT5 Downloads % shasum -a 256 ./2023-09-05-moode-r836-lite.img  
76ffc9658efaf2eba59abd0e38ab43745e8ae64faa4710f0ef88e25941f0ac6d  ./2023-09-05-moode-r836-lite.img

The enhanced security starting with the 8.3.0 images is for your benefit. 
Use the Raspberry Pi Imager and you should be all set. You can even pick the moOde images right from the Media Player OS section.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply


Messages In This Thread
RPi 4 8GB misfunctions with 8.3.6 - by yellowruby - 09-22-2023, 09:32 PM
RE: RPi 4 8GB misfunctions with 8.3.6 - by Nutul - 09-22-2023, 10:51 PM
RE: RPi 4 8GB misfunctions with 8.3.6 - by Nutul - 09-22-2023, 11:34 PM
RE: RPi 4 8GB misfunctions with 8.3.6 - by Tim Curtis - 09-23-2023, 12:26 AM
RE: RPi 4 8GB misfunctions with 8.3.6 - by Nutul - 09-22-2023, 11:48 PM

Forum Jump: