11-29-2023, 01:51 PM
(11-29-2023, 01:46 PM)Tim Curtis Wrote: The symptom suggests an issue with the physical USB connection. Spray some contact cleaner in the Pi USB ports and cable or DAC USB connectors. Do it a couple of times, insert/remove the connector, etc.
Thanks Tim, I will try and might be also the solution to some occasional drops in sound that I'm now hearing.
The Alsamixer tip from the review was convenient by the way. In the Loconaq E1 I'm testing now there's two outputs. A balanced one with 2,5mm plug and a 3,5mm single ended one, the speakers are connected via the 3,5mm. In alsamixer I saw that the 2.5 output was on the setting as shown in MoOde (95%), but the active 3,5 was set at 50% so sound level was rather low, lower then expected at least.
