USB SPDIF Configuration?

[TheOldPresbyope]

@SerbJ 

I owe you an apology. I had too many browser tabs open and thought I was posting my question to a different thread. Please disregard it.

Regards,
Kent

Don't feel bad, I missed your post on the end of the first page!  Just saw it.  

From ALSACAP got:

Sample Formats: S16_LE, S32_LE, SPECIAL, DSD_U32_BE

Audio Info Reported outputing PCM 32bit, 44.1KHz, stereo

Using the shell and alsamixer I might have found something.  I don't understand all the pieces, but looks like the L/R volume is set as low as it can go.  When I compare it to the Peachtree, it is set to 100/100 for L/R.  I'd post the screen capture, but looks like I'd have to host the pic someplace.  

Tomorrow, I am going to raise the L/R volume and see what happens.

Actually, that was what I was headed toward but I conflated your thread with another which dealt with an HDMI issue.

You can add an image file by first adding it as a new attachment and then inserting the attachment into the post---check out the Attachments block below the post entry box.

Here's an example looking at my Khadas Tone 1 board (a USB DAC).

   

I've chosen the Hardware volume control setting under Output device in the Audio config panel, the Max volume setting under ALSA options is 100%, and the volume knob in the moOdeUI is set to 19.

Regards,
Kent