02-25-2024, 07:01 PM
Terminal access is only possible over SSH but this requires a network connection to the Pi.
Couple things to check:
- The Zero W only supports 2.4 GHz WiFi so make sure the SSID you are specifying is for your 2.4 GHz network.
- Double check the SSID and password in the Pi Imager.
If you have a USB to Ethernet adapter leave the WiFi settings as entered and connect via Ethernet, then reboot and post the contents of the startup log.
The log can be viewed via the SSH command moodeutl -l or downloaded via the Logs section in System Config, or via Menu, System info from the any of the Config screens. The startup log will be at the end of System info output.
Couple things to check:
- The Zero W only supports 2.4 GHz WiFi so make sure the SSID you are specifying is for your 2.4 GHz network.
- Double check the SSID and password in the Pi Imager.
If you have a USB to Ethernet adapter leave the WiFi settings as entered and connect via Ethernet, then reboot and post the contents of the startup log.
The log can be viewed via the SSH command moodeutl -l or downloaded via the Logs section in System Config, or via Menu, System info from the any of the Config screens. The startup log will be at the end of System info output.
