USB SSD is not visible in folder view. There is no USB device listed in folder view. RPi Zero W Moode 8.3.8 Sabent USB to SSD adapter (it looks like this) and Goldenfir 1TB SSD (also Kingston 240GB SSD). devmon selected as USB auto-mount. The drive is mounted, and I can list all files on the drive with SSH (find /media/Goldenfir -type f) .
Solved: On the RPi Zero and Zero W, devmon is not functioning as expected, possibly due to an incompatibility with the Sabrent USB SSD adapter. Moode access of the USB SSD was ultimately successful. The same USB adapter and SSD drive worked without difficulty on a RPi3B and Zero 2W.
This cheap adapter worked for me with the Zero W (with a powered USB hub and 1TB Goldenfir SSD). It is identified as Other World Computing SATA External USB adapter PA023U3. It also works with the Zero 2W (it also requires a powered USB hub).
Code:
20240225 164301 worker: --
20240225 164302 worker: -- Start moOde 8 series
20240225 164302 worker: --
20240225 164302 worker: Successfully daemonized
20240225 164302 worker: Wait for Linux startup...
20240225 164316 worker: Linux startup complete
20240225 164316 worker: Boot config backed up
20240225 164338 worker: Session loaded
20240225 164341 worker: Package holds applied
20240225 164345 worker: File check complete
20240225 164345 worker: Debug logging off
20240225 164345 worker: Reduced logging off
20240225 164345 worker: --
20240225 164345 worker: -- Audio debug
20240225 164345 worker: --
20240225 164345 worker: ALSA cards: 0:sndrpirpidac | 1:empty | 2:empty | 3:empty
20240225 164345 worker: MPD config: 0:ProtoDAC TDA1387 X8 | mixer:none | cardnum:0
20240225 164345 worker: Mixer name: none exists
20240225 164345 worker: Hdwr volume: controller not detected
20240225 164345 worker: Volume knob: 0
20240225 164345 worker: --
20240225 164345 worker: -- System
20240225 164345 worker: --
20240225 164352 worker: Host: moode
20240225 164352 worker: Model: Pi-Zero W 1.1 512MB
20240225 164353 worker: moOde: 8.3.8 2024-02-14
20240225 164353 worker: RaspiOS: 11.7 Bullseye 32-bit
20240225 164353 worker: Kernel: 6.1.21+ 32-bit
20240225 164353 worker: MPD ver: 0.23.14
20240225 164353 worker: CPU gov: ondemand
20240225 164353 worker: Userid: mark
20240225 164353 worker: Homedir: /home/mark
20240225 164353 worker: Timezone: America/Denver
20240225 164353 worker: Keyboard: us
20240225 164353 worker: USB boot: n/a
20240225 164353 worker: File sys: expanded
20240225 164353 worker: HDMI out: off
20240225 164353 worker: Sys LED0: on
20240225 164353 worker: Sys LED1: sysclass does not exist
20240225 164353 worker: --
20240225 164353 worker: -- Network
20240225 164353 worker: --
20240225 164353 worker: Eth: adapter does not exist
20240225 164354 worker: Wlan: adapter exists
20240225 164354 worker: Wlan: country US
20240225 164354 worker: Wlan: SSID LivingStereo
20240225 164354 worker: Wlan: other none
20240225 164354 worker: Wlan: router off
20240225 164354 worker: Wlan: timeout up to 90 secs
20240225 164354 worker: Wlan: connect to LivingStereo
20240225 164355 worker: Wlan: sleep disabled
20240225 164355 worker: Wlan: method dhcp
20240225 164355 worker: Wlan: address 192.168.0.144
20240225 164355 worker: Wlan: netmask 255.255.255.0
20240225 164355 worker: Wlan: gateway 192.168.0.1
20240225 164355 worker: Wlan: pri DNS 192.168.0.1
20240225 164355 worker: Wlan: domain
20240225 164355 worker: --
20240225 164355 worker: -- Software update
20240225 164355 worker: --
20240225 164355 worker: Automatic check: on
20240225 164355 worker: Checking for available update...
20240225 164356 worker: Release 8.3.9, 2024-02-23 is available
20240225 164356 worker: --
20240225 164356 worker: -- File sharing
20240225 164356 worker: --
20240225 164356 worker: SMB file sharing: off
20240225 164356 worker: NFS file sharing: off
20240225 164356 worker: DLNA file sharing: off
20240225 164356 worker: --
20240225 164356 worker: -- Audio config
20240225 164356 worker: --
20240225 164357 worker: MPD config: updated
20240225 164357 worker: Audio device: ProtoDAC TDA1387 X8
20240225 164358 worker: Formats: S16_LE, S24_LE
20240225 164358 worker: Mixer type Fixed (0dB)
20240225 164358 worker: Mixer name none exists
20240225 164358 worker: Hdwr volume: controller not detected
20240225 164358 worker: ALSA card: 0
20240225 164358 worker: ALSA mode: Default
20240225 164358 worker: ALSA loopback: off
20240225 164358 worker: CamillaDSP: off
20240225 164358 worker: Renderers: active flags reset
20240225 164358 worker: --
20240225 164358 worker: -- MPD startup
20240225 164358 worker: --
20240225 164401 worker: MPD service: started
20240225 164401 worker: MPD port 6600: accepting connections
20240225 164402 worker: MPD ALSA Default: on
20240225 164402 worker: MPD ALSA Bluetooth: off
20240225 164402 worker: MPD HTTP Server: off
20240225 164402 worker: MPD crossfade: off
20240225 164402 worker: MPD ignore CUE: yes
20240225 164402 worker: MPD CDSP volsync: off
20240225 164402 worker: MPD CDSP volrange: 60 dB
20240225 164402 worker: --
20240225 164402 worker: -- Music sources
20240225 164402 worker: --
20240225 164402 worker: USB auto-mount: devmon
20240225 164402 worker: USB drive: 04E3-8958
20240225 164402 worker: USB drive: Goldenfir
20240225 164402 worker: NAS source: Celeron-G1830
20240225 164410 worker: NAS mount: mount all submitted
20240225 164410 worker: --
20240225 164410 worker: -- Feature availability
20240225 164410 worker: --
20240225 164410 worker: Input select: available, src MPD, out ProtoDAC TDA1387 X8
20240225 164418 worker: Bluetooth: started, Pairing Agent started, ALSA mode Default
20240225 164418 worker: AirPlay: available
20240225 164418 worker: Spotify Connect: available
20240225 164418 worker: Squeezelite: available
20240225 164418 worker: RoonBridge: not installed
20240225 164418 worker: Multiroom: available
20240225 164418 worker: UPnP client: available
20240225 164418 worker: GPIO buttons: available
20240225 164418 worker: HTTPS mode: available
20240225 164418 worker: Stream recorder: n/a
20240225 164418 worker: --
20240225 164418 worker: -- Volume levels
20240225 164418 worker: --
20240225 164418 worker: Volume knob: 0
20240225 164418 worker: Saved MPD vol: -1
20240225 164418 worker: Saved SRC vol: 0
20240225 164418 worker: Mixer type: none
20240225 164419 worker: Hdwr volume: controller not detected
20240225 164419 worker: CDSP volume: 0.0dB
20240225 164419 worker: --
20240225 164419 worker: -- Peripherals
20240225 164419 worker: --
20240225 164425 worker: Local display: off
20240225 164425 worker: On-screen kbd: off
20240225 164425 worker: Rotary encoder: off
20240225 164425 worker: USB volume knob: off
20240225 164425 worker: LCD updater: off
20240225 164425 worker: --
20240225 164425 worker: -- Miscellaneous
20240225 164425 worker: --
20240225 164425 worker: Auto-CoverView: off
20240225 164425 worker: CoverView timeout: Never
20240225 164425 worker: Auto-shuffle: off
20240225 164425 worker: Auto-play: off
20240225 164425 worker: Web SSH server: on
20240225 164425 worker: Maintenance task: 360 mins
20240225 164425 worker: Current view: reset to Playback
20240225 164426 worker: Session check: ok
20240225 164426 worker: --
20240225 164426 worker: -- Startup complete
20240225 164426 worker: --
20240225 164426 worker: Mount monitor: off
20240225 164426 worker: Radio monitor: off
20240225 164427 worker: Watchdog monitor: started
20240225 164427 worker: Responsiveness: Default
20240225 164427 worker: ReadySolved: On the RPi Zero and Zero W, devmon is not functioning as expected, possibly due to an incompatibility with the Sabrent USB SSD adapter. Moode access of the USB SSD was ultimately successful. The same USB adapter and SSD drive worked without difficulty on a RPi3B and Zero 2W.
This cheap adapter worked for me with the Zero W (with a powered USB hub and 1TB Goldenfir SSD). It is identified as Other World Computing SATA External USB adapter PA023U3. It also works with the Zero 2W (it also requires a powered USB hub).
Hardware: RPi Zero W | Allo Kali | ProtoDAC TDA1387 X8 | PGA2311 | Icepower 500ASP | Harbeth SHL5
Software: Moode 8.3.3
Source: Win 10 NAS
Software: Moode 8.3.3
Source: Win 10 NAS
